Greetings,
Any idea how many KW the x and y motors on the Syil X5 are?
Regards,
Dennis Paish
Type: Posts; User: dpaish
Greetings,
Any idea how many KW the x and y motors on the Syil X5 are?
Regards,
Dennis Paish
At Fabtech, Haas was only one row over and 10 booths down from Tormach. The Tormach 1100MX was listed at 28K and the Hass TM-1 was 33K. Both machines side by side, there is no comparison. Done.
Greetings, See picture that indicates IN KIT. You get that machined part and the machined insert with the 5 belleville washers. You have to build the brackets, purchase the cylinder, rod and...
power draw bar kit = $550
pan cake Cylinder (you order, I have part number) = $175 (full retail)
1/2 Aluminum scrap = CHEAP
3/8 ready rod = $10.00
2 way 5 port switch (you order, I have sample...
Greetings,
I convinced Syil Canada (Keith) to allow me to complete the Syil X4 Pneumatic Drawbar project. Keith designed and built 5 kits before he shelf the project. I got one working and 4...
Greetings,
Anyone give a review of these machines?
Regards,
Dennis Paish
Greetings,
Anyone ever use the Maxi Torque system on a X4?
Home - All Machine Parts, Inc.
Thoughts?
Dennis Paish
Greetings, The torrent has my interest. Why 3 phase?
/DP
Very Nice. I wonder why you did not install a more robust controller? Looks alike another option to upgrading from my S4.
/DP
Greetings,
I have a Syil X4. I need to tap lots of 10-24 holes in 0.5" aluminum. Can it be done? Any recommendations of type of tapping head to purchase.
Regards,
Dennis Paish
Thanks for your help. I will try your solution tonight.
Dennis
Greetings,
Same Issue. Maybe Syil Engineering Support can help.
Bump.
Dennis
Greeting,
On a X4, why does the manual function controlling feed rate does not work? Is this a Mach 3 setting? Very frustrating when doing jobs and you can not dial in the feed rate.
Dennis
Thanks for your reply. It has not done it again since my post. I hope it was just those couple days. I do not use the mill everyday, so I post again if it does happen.
Where is Syil Support? ...
Anyone?
Today it took almost 4 tries before it turned on. I was hoping for some advise before I took the back off.
Syil Technical support. Any thoughts where to start or have you seen this...
I have a 2009/2010 X4. Up to now it has worked without any issues. The past couple times I turned it on the blue LCD panel just blinks. I can shut down the main power wait 5 seconds and it may or...
I love my X4! Living near the Canadian dealer was a deciding factor of purchasing it over other competitors. I wish it had more HP, RPM and work envelop. I grew out of this machine very fast and...
Thanks everyone who replied. I made a great contact.
Dennis
Greetings,
I have a small cnc milling machine and looking for a person whom will be able to draw my knife handles in 3d. I am using visual mill for a CAM program.
I do not have the experience or...
Pure-Power you are 100% correct. PCS has always played these games on forums pretending to be someone else given great reviews on these tables.
Let me state that I personally have rebuilt 2 of...
Sad support from a company that had potential!
I guess this is one of the reasons why Syil Canada has made their decision to go in another direction. I can say it was Keith's customer support he...
Would it be hard to link the Select Wizard to execute the NFS Mill Add On?
I rarely use he standard wizard, but use the NFS Mill Add On daily.
Regards,
Dennis Paish
Greetings,
When executing a post or cutting sequence, as the Syil X4 CNC Mill is cutting I can over-ride the spindle speed, but can not over-ride the Feed Rate. Is the ipm locked in Mach3 during a...
Greetings,
It sure would be a nice feature if it would work!
My mach 3 version is R4.042.029
Any advice would be very helpful.
Dennis
Bump.
I still can not increase or decrease my feed rate when a program is running. Any suggestions would be very helpful.
Regards.
Dennis Paish
Greetings,
I checked the manual (online on at Syil Canada) and you would think that the fuses listed in the manual would have the specifications.
Does anyone know the main fuse and spindle...
Greetings,
I just completed my little 18" x 24" router and looking for a coin size 3D dfx I can play with and cut out. I do not have any 3D software yet.
Anything would be nice to try.
...
Greetings,
I just picked up a very lightly used CamTech RM II servo cnc router with a 10 HP spindle. The bed is 5'.5" wide and 15' long, with no vacuum bed. Please provide any suggestions, links...
Greetings,
I am looking for just a little more output from what the Wolfgang spindle is offering. I only have a small 18"x14" router table which was a PCB router table I converted to Mach 3 with...
What changes to Mach3 are required after you installed the encoders?
Dennis