If you set up as an conical tool and use it in an engrave toolpath then your cuts will centre on your DXF line.
Type: Posts; User: shmity
If you set up as an conical tool and use it in an engrave toolpath then your cuts will centre on your DXF line.
Is the multicopy tool what you are looking for?
https://youtu.be/jUbVMTvpclw
Hi Folks,
I have some curved pressed ply blanks that I need to cut backrests and seats from, ie an outline. Im wondering if theres a way to do a simple routing offset outline with a 3d lift and...
I've just finished creating strategies for all my common hole sizes for all our materials for exactly that reason.
Unfortunately no, you can set the main cut feed rate, final cut feed rate and plunge speeds, but it looks like they are consistent across the tool path. But using picktools strategy, the longer the...
Thanks Picktool! Here I am thinking round hole, round entry. Just did a quick simulation and thats perfect!
Can anyone tell me if the machine drivers/post processors are directly compatible between enroute 6 and enroute 7?
Thanks
Thanks Craig. Not that I can find. The best I have been able to produce is a lead in/lead out at the radius of the cut, minus tool diameter that takes 90 degrees to spiral down and up. Which almost...
Hi Folks,
Im wondering if what im trying to do is possible in enroute. We bore quite a few holes(25mm diameter to 80mm diameter) in various materials (mdf, compact laminate, corian) and Id like...