finally the problem is fixed
after replacing part by part of the powermate without results
we replaced the entire powermate module
seems to do the trick
it seems multiple parts of the old...
Type: Posts; User: supnb
finally the problem is fixed
after replacing part by part of the powermate without results
we replaced the entire powermate module
seems to do the trick
it seems multiple parts of the old...
After 2 visits from fanuc and 1 more from a service company were still stuck
the main problem was caused by the powermate module
that module has the error 900 rom parity error
they have...
I'm having problems on one of our machines
its giving the error
950 PMC system alarm
PC050 IO link CH2 4004:4343-4343
i now this is probably a DC short in the I/O but cant find it
it...
found the answer
Zero position set was set to invalid
changed to valid and then the M01 error was gone
- - - Updated - - -
found the answer
Zero position set was set to invalid
changed to...
I have this fault: Z70 ABS. ILLEGAL X
this usually means that the encoder battery is low but no fault on the drive.
I've replaced the battery just to be sure but i can not move the*X & Z axis...
i have a problem with the spindle orientation
Fanuc spindle drive (A06B-6055-M215 H506) model 15
orientation PCB code "A20B-0008-0244/0203A "
FS15MA controller
when i use M19 the...
we had problems with the Y-axis dropping a few mm every time after the servo started
give error message 410 SERVO ALARM: n-TH AXIS -EXCESS ERROR
411...
there was a problem with the memory, shortly after this fault it failed completely and had to be replaced
i'm having some trouble with this unit, first the COSTUM screen is blank
and the machine is not allowing a tool-change