Great
Thanks for the hep.
Type: Posts; User: rugbyal
Great
Thanks for the hep.
Recently had a used Series 5000 installed. The spindle turn CCW.
Is it as easy as reversing two wires in the cabinet to change rotation.
Even the sample programs in the controller have it spin...
I am in the process of bringing a SF series back on line after having it sit for over 5 years. In that time I have forgotten how to do some things with the keypad. It is the pedestal type, not the...
We have a Fanuc 15m controller with a Fanuc 90-10 Micro PLC.
We had been having issues with the machine not homing, and giving no errors. We have replaced a relay and that seems to have solved that...
I have an SF series machine that the ball nut on the Z axis has cracked. The bearings are fine but apparently the threads filled up with crud and finally bound up.
Two questions,
1) Where can I...
Well I came in this morning and tried to send a file, and it worked.
Changed nothing from yesterday. It just decided to start working. Perhaps it is just old and tired like me.
Al, it was set...
Ok.
I wound up changing the input to the other port on the I/O board.
I now can transmit about 800 bits and then it stops. The INPUT is flashing but no more of the file transfers.
I receive no...
I am trying to send a file to my model 0-M controller. It worked as recently as last week.
If I punch the I/O then READ I get the P/S 086 alarm.
If I try and send it from the original computer,...
I am having a problem with my Fanuc 15-M contols. It shuts itself off whle the machine is sitting idle.
It happend once and after powering it all the way down by switching off the power completely...
Thanks again for the help with the connection problem. Now all I have to do is figure out the boring head.
But, started making simple parts parts Saturday afternoon.
Thanks again for all your...
I have checked that and the folders are the same.
IP schema is right 192.168.0.101
Subnet is 255.255.255.0
Gateway is blank
DNS is blank
I have even tried moving the computer next to the...
Thanks for the help. I will check that out tonight.
As far as the DNC library (C:/DNC) folder, can I use whatever folder that Microvellum is set up to save posted files to?
Like I said, this...
I am trying to get a model 5000 up and running. It has the ethernet connection. I have the PSS software and am trying to connect the machine directly to the computer. So far it will not see the...
I was looking for large slot together snowflakes I had seen them somewhere before and thought perhaps here. Or perhaps a simple flake that would lend itself to being blown up to 3 or 4 ft tall ( 1/2"...
I currently am employed programming and setting up three different CNC routers and a waterjet. I have often looked at and thought seroiusly about applying for a job as a CNC mill or lathe operator...
We have an 8 head Hein router with Toshiba spindles Type 1K Form ZU and was wondering if anybody had a cut -away of the spindle. I have the task of replacing the bearings and was hoping for a little...
I am running a Heian 8 head router using Mastercam.
For some reason when the next tool selected drops and the heads/table move, the head is out 3 in in the Y direction but nothing in the X...
Does anybody have a DXF of the outline of the state of Texas. I was asked to create a piece for a charity auction and can't find the one I had.
Thanks
My latest project has me getting a Heian 8 head router with a Fanuc 15m controller up and running. No manuals or info.
I am Drip feeding a file (or at least attempting to) and get a buffer...