Search:

Assist gases, generally speaking, Nitrogen for thinner stainless steel and aluminium. Oxygen for steel. This depends on the type and power of laser of course.

Thanks Tamsker, I haven't had a chance to contact the machine supplier but I will be able to within the next week, thanks for your help an \i will let you know how I get on.

I hadn't yet as I thought I would try and see if these heads were as available as spindles, apparently they aren't, so asking the Ukranian company may be the next move.

Well looks like they are going to be difficult to find. Just have to keep researching

Hi all

I am trying to find a manufacturer / supplier of two types of head for retrofitting to a cnc router.

1.) an impact engraver head.

and
2.) A 2 part resin dispenser head.

Similar to...

HI all

Would anyone have a good start point regarding feed/speed for this type of routing?

Cheers

Alan

Hi

The machine has a 3kw water cooled spindle. max travel speed of the machine is 45000 mm/min travel. and 35000 mm/min max working speed X and Y Axis are helical rack and pinion.

Cheers

Alan

Hi Gerry

The roughing specs are as follows
Spindle speed 24,000 rpm
Stepover 2.76
Feed rate 30mm sec (slow I know buy I have only been using the machine a couple of days so didn't want to...

Hi All

Just got my new 1325 CNC machine and have been tackling the learning curve. Never used a CNC before. Here are the first test pieces and I am pretty pleased with the results so far....

Hi All

Just got my new 1325 machine and getting to grips with DSP controller. The only sticking point I have is, When I use the tool height sensor, to set the Z height for WCS the cutting always...

Hi to you all

I am a glass and stone carver, currently looking in to a CNC machine that would help me in my business and also for carving wood and cutting of prototypes.
I am based in Ireland and...