Search:

Well i have a couple of 8" disks and formatting them should be possible in the machine itself and i'm about to experiment with it today.
and inside the machine i cant find the parameter file and i...

Hello

I am having problems with saving the parameters of a machine an MC-6VA to be precise.

i have managed to get to send files to and from the PC DNC but the main thing i'm trying to...

Thank you for a good answers learned a bit from it, and will look into it more thoroughly.

1. i was surprised myself when i started here to see a working 8" with its floppies in pristine...

Hello

Where I currently work they have an old mill with an OSP-5000 an 8-inch floppy + RS232 connection.
thing is it has a tendency to loose its memory very easily and we have to reset the...

yepp first place i looked, been all over the internet an no place has the programming manual.
Live in a kind of rural area of Sweden so finding anyone that know a lot and i wanted to read and learn...

Hello

Been looking for a programming manual for OSP-U100M but for some reason i cant find it anywhere.
my machine shop has just invested in a machine and wanted to read up on the programming...

Learning so much here I love it!

So if I have move voltage (as long as it is with in the driver specs) it makes the motor go smoother? and the driver will adapt and give the motor what it needs?
...

well my plan is to have at least 3A Steppers on the machine, and if I have 3x3A steppers the power supply must be able to give at least 9 but I have been looking at a 11A power supply so it wont be...

Well when i say "budget of 200$" I mean ONLY driver + board I plan a setup for 2x Nema23 and probably a 1x Nema 34 for Y axis. the size of the machine is around 2' x 4' the spindle has its own...

Ah ok So a ok Breakout from E-bay is ok. then just buy a good driver for each axis? hmm will save me some headache. :D
Think i have been overthinking the whole thing (have a tendency to do that) but...

Hello
i'm planing my first CNC mill build and have gotten stuck at one part. i have found some good stepper drivers but i need a decennt Breakout board to controll the stepper motors.
Been hovering...