What model of trumpf are you running? What dose your "TC_LASER_ON(1,"ST006OC17",10,100)" line read?
Greg
Independent CNC Programmer
Type: Posts; User: Independent CNC
What model of trumpf are you running? What dose your "TC_LASER_ON(1,"ST006OC17",10,100)" line read?
Greg
Independent CNC Programmer
Does anyone know what "M87" and "M121" does on a Mitsubishi laser?
Take a look at WE-CIM from Wittlock Engineering www.https://wittlockeng.com
It may be a little more than you want to spend, however, you are not going to find any true shape nesting for any less.
...
I have programmed this model for three differant comnpanies with very few issues. Let me know if you need any help with programming.
Greg
[email protected]...
Looking for some sample IPG Laser Cube CNC code. Need help understanding if the tech tables are controlled by the program or by the operator at the control.
Greg King
[email protected]...
Take a look at WE-CIM from Wittlock Engineering. Wittlock Engineering LLC - Software, Fabrication
The LST is just an extension that the Trumpf software out puts. This can be anything you want it to be like CNC or just NC. I use software called WE-Cim from Wittlock Engineering that is capable of...
What software are you using to program with?
Greg King
Independent CNC Programmer
www.independentcnc.com
Could someone send me a sample code of an Amada 245 with more than one re-position move?
Independent CNC Programmer
http://www.independentcnc.com/
My mission is to share CNC programming...
I would take look at the Salvagnini. Have all of them quote you cycle times for running some of your parts.
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC...
If you only need a few programs I can generate them for a small cost. The software I am using would cost you around 5k.
Independent CNC Programmer
www.independentcnc.com
My mission is to...
Take a look at the TC_LASER_ON “Laser Method”. You may not be able to control the height regulation in the tech tables; however, you should be able to change them in the program.
Independent CNC...
I have some old programming manuals and could help with any programming or commination issues you may have. Sorry no electrical drawings.
Independent CNC Programmer
www.independentcnc.com
...
You could take a look at WE-CIM from Wittlock Engineering http://www.wittlockeng.com/
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations...
John, you should be able to get a PDF manual from Salvagnini for that machine to help you understand the code. If you get stuck you can e-mail me and I will try to help you out.
You should be able to send an e-mail to Trumpf Applications [email protected]
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations...
You can take a look at WE-CIM that has true shape nesting and is more for punch/laser/plasma machines. Welcome
JetCam is the only other one I would take a look at.
Independent CNC Programmer
...
Yes Trumpf has some generic software that can be used to transfer programs thru the RS232.
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations...
I have written post for several Trumpf's so if you need help just e-mail me [email protected] Below is some code for a Trumpf 2025 that will give you a good idea what to expect.
BD...
I will caution you that all the Trumpf’s beginning codes are a little different, just depending on the features of the machine. I would recommend calling Trumpf applications to see if they would send...
I would say Trumpf, however, I also agree that you need to see what machine has the best service in your area.
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC...
I have software that I used to use to program a Burny 10. We ended up doing a lead in with an arc and then created a gap at the end rather than a lead out.
Independent CNC Programmer...
Sorry I don’t know of anyone in that area. You may try contacting the Trumpf reseller for that area to see if they know of anyone.
If they need any programming assistance please pass my...
Applicam, do you really think you could do a retrofit on a Salvagnini? If so what would the price be?
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming...
Trumpf 2400 Turbo laser is the actual laser model. Does it have Trumpf 2503 E written on the side anywhere?
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC...
What model of Trumpf laser do you have?
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations for a lifetime.
Why are you trying to use the M58? If you are trying to do this for formed parts I would suggest making any forms or embossed last or try to use the Sheet Type 2 in the M06 code.
Independent CNC...
From what I have heard Sigmanest does really good with lasers, but not very well with punching.
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming...
Just thought if the code was not to complicated I would write a post in my software. Sounds like you need someone who knows your software.
Independent CNC Programmer
www.independentcnc.com
...
Would you need the programmer to be on site?
Independent CNC Programmer
www.independentcnc.com
My mission is to share CNC programming innovations for a lifetime.