Try Metal-supermarket ottawa (not far from princess auto).
Or metaux- solition in montreal...
There is also 'metal-profusion' in montreal.
I live in the Hawkesbury area... If you need help...
Type: Posts; User: weibelmarco
Try Metal-supermarket ottawa (not far from princess auto).
Or metaux- solition in montreal...
There is also 'metal-profusion' in montreal.
I live in the Hawkesbury area... If you need help...
Hi,
Great find. One of the best benchtop mills around but rare... i wish they still make them!
I believe you are missing the CNC control unit (Cortini CNC 2437), without it you will need something...
Some silicone sealants have a nasty way with coolants and machines.
Make sure to fix you leaking enclosures with sensor-safe silicones.
There is lots of info already on CNCzone !
http://www.cnczone.com/forums/fanuc/96501-kiwa_excel_510_toolchange_help.html
... and more at the 'related topics' window at the bottom of the page !...
Generally if you change Tools in MDI you don't need to G28 the Z as 'M6' calls a Macro which should already contain the Z-Axis Ref-Return.
Just try
M6 T1 ;
or try
G28 G0 Z0 ;
M6 T1 ;
If...
Just to get this cleared first...
Do you have values other than 0's in the 'Shift Offset' (above the G54 on the first Work-Offset page) ?
Thanks Forbest
I figured it out when the office finally found the papers ;)
Me too just eyeballed the corect position untill it went smoothly and set the new parameters.
Works well since...
...
Indeed, popping noise is a sign for worn belts !
Remove the head cover and you will recognise what has to be done.
The area is pretty accessible and no special tooling needed.
Loosen this and...
Thank you lajosgy !
I figured that could be it.
I since replaced the battery. Its a AA sized 3.6V Li cell.
Still need to reset the chain when i get a chance tho, she's off by about an inch.
...
Saw this on ebay
Reiden lathes are very fine machines. very rare on our continent.
Grab it if you can !
http://item.mobileweb.ebay.com/viewitem?itemId=310399686554
I used to work with...
One more bump for good measure :)
Bump :)
Hello :)
The AC Servo driver is a Daewoo Pro-Motion model dasd ct15spxb 02.
It is mounted in the power cabinet on the right side wall.
This unit drives the servo motor for the tool mag (chain)....
You should like Montreal for its more european flair and mindset.
I don't live in Quebec but just a 45 minute drive from centre ville.
The university strike had quite an impact around here.
Yes...
Its been a while since i worked on a Hawk (Dynapath) but i do remember the same problem after an overtravel...
Isn't there a overtravel release on the back of the electronic box ? Or on the side...
M84 will let you feed when spindle is stoped !
M85,M30 or 'Reset' cancels it
Uhhhh , I like the macro !
A very elegant solution. Thank you samu !
I still want to fiddle with what M84 actually triggers on that Daewoo...physically and/or digital.
I will keep everyone...
Very much so !
Thanks for reconfirming this viorel !
...but still no feed after the changes to those parameters.
The M84 works great !!!
Thank you dcouper !
M85 or 'Reset' cancels M84
Now...
I really want the machine to act 'normal' by correcting the parameter.
It is a second-hand unit and the previous owner must of ordered it that way or disabled the function for operator safety.
...
Thanks all for your help !
The program is in inch/min.
The program runs smooth on a Matsuura with Fanuc 30i.
Al is thinking right up my alley.
I have to find the parameter(s) that ignores the...
Hello :)
I have here a FANUC 16iM running a Daewoo 630 horizontal.
I need to make a back-face with a tool that requires the spindle to be oriented and fed through the pilot hole.... but it wont....
An aluminum tooling plate may be an option as you would drill constantly in solid material.
That can cause problems on larger sheets which can only be clamped around the edges as it may bulge up...
Gildemeister is now the 'G' in DMG batched turning centres, together with Deckel and MAHO.
Ravensburg lathes are usually 4' swing and up!
Good for you as you found what you were seeking ! :)
...
a RAVENSBURG maybe ?
Hi BillBert
I have a L300 CNC Mill with Cortini 2437 Control.
It allows to run the H105 Lathe as well making full use of the Weiland conector.
Feel free to ask !
The imperial system is only used in North America and even here it is on the way out (neglegtable for some CNC control manufactors I guess)... interesting is, in my opinion, working in the Canadian...
Hello :)
I found a used Meccanica Cortini L300 with what seems to be a full option package (bench, splash guard, 30 taper, upgraded or last gen. CNC control and possibly auto drawbar?)for sale in...
Hello mgb1974
I sometimes have the counterweight bang against the inside of the colum of my FEELER FV CNC when i have to peck for a longer period even tho the machine is level. The counterweight...