Search:

Good day Turbocad

It is a while now that you have your NEWKER control. Are you still happy with it. I bought myself one , but it is a 5 axis mill with RTCP for CNC router I'm building.
My first...

Hi there

I'm planning to build a 5 axis router and looking for some answers on the following:
Does the KmotionCNC software with RTCP work well with the CSMIO/IP - S breakout board?

Who Is Methods, and where in the world are they?
I'm in South Africa.

Hi there
I bought a Feeler FV800 machine with Fanuc OiMB control.
I need some machine operators manuals( G codes and M codes) for these machines. I did try and contact the MTB, but they don't want...

Hi Fordav11
Hi Fordav11
Thanks for the email.
The machine have 3 servo amp boards and the encoder on the spindle as you mentioned.
The person from who I bought the machine deleted all the...

Hi all

Is there someone that can tell me if you looking at the ROM board with the EPROM’s on from a Fanuc 6T-B how many axis the machine have?
I have 2 Tsugami machines.
Machine 1 is a 6T-A...

Hi TC429
Dont you perhaps have a manual for FAPT LADDER V06.1.
I want to convert my Rom binary files to ladder, but I dont get it right.
Any help please.

Hi everyone
I bought a Tsugami with a Fanuc 6T-B control on it fitted with an axillary C-axis.
The C axis servo motor was broken when I bought the machine. I got a yellow cap motor on ebay.
The...

Did you find the manual? I got one scanned for myself.

Hi memoryman
I hope you can help me. TC429 said I must ask you for a program to read my Fanuc 6T-B ROM chips.
I have a binary copy that someone made for me with his eprom reader. I try to get the...

Hi there TC429

How can I get hold of him, or is it possible that you can send me a copy of his program PLEASE!:banana:

HI TC429

I did get the program to run, but can this program read binary files or just hex files?

Hi all
Thanks for everyone’s help.
I got the axis to reference to zero now.
The person from who I bought the machine changed somehow all the parameters 0096 up to 0139 to -1.
I went and changed...

Thanks for the info.
:cheers:

Hi TC429
Thanks I do got the idea.
What basic program did you use to run your extracting software?

Hi TV429
Please help me.
What do you mean with unsplitting in your program.
PRINT#2, TAB(0); "FORMAT REQUIRES UNSPLITTING 2716 E-PROMS FROM SOCKETS"
PRINT#2, TAB(0);"251/252 (251= LOW BYTE...)"...

Hi TC429.
I did get the program, but what basic is this. Does it still run in DOS. I have used Visual Basic 6 before. If you talking about the raw chip date is that the binary file that I got from...

I have a Fanuc 6T-B control on my Tsugami. How do I now what PMC it have. Where do you get J500 software or info on it?
Attached is a picture 195960of my ROM board

Hi there

This is a 6T-B. The 6T-A the chips is on the main board. On the 6T-B the chips is on a ROM board that plugs into the main board. I have both type machines.
What do you use to convert the...

195870195868
Hi there
Find the picture attached. Can You do all of the chips?
What program do you use to convert it to the text layout?

Hi there

Someone did download the 6 EProms for me, but not the 902 chips.
Please send your email address then I can send you a picture of the board.
What program do you use to convert it from...

Hi Memoryman
Thanks for the info on the ePROM. How do you get to the PC parameters. If I press parameter putton you only see up to P407?

Hi there
I am looking for wiring and ladder diagrams for a Tsugami lathe with C axis Model NCMU 70/160 with Fanuc 6T-B control.
Can you read back the info from the ROM chips and convert it into the...

Hi there
Can you get the ladder for 6TB if I give you the chip numbers?
Can I convert the Rom info buck into ladder?

I did find DECI address 0010 bit5. I will try to change it and see what is happening.

I did try and look in the manual I have, but I don’t see “DECI” there. The moment I hear from you I will try that.

At this stage I can’t manage to do it on the right position to see what happens on the dog when it drops of, but when it does its own homing sequence in the middle of nowhere, I don’t see anything...

Hi there
I haven’t seen parameters 900s, where do you find them. Did I perhaps not page down far enough?
And DGN 300 what does it stand for and where do I find it?

Yes we did push the X and Z homing limits and the states change from 1 to 0 when you push them. address 0032 bit 5 and 0033 bit 5.
When you do the zero return it starts of fast slow down to crawl...

Hi there
I did check and measure the wires and it looks OK. Why will it then affect both axis?