I want to purchase a coolant mist filter system onto my Haas DM-2 and just looking for some recommondations for what has worked for you.
I would prefer a system that doesn't need to exhaust out of...
Type: Posts; User: kentdesautel13
I want to purchase a coolant mist filter system onto my Haas DM-2 and just looking for some recommondations for what has worked for you.
I would prefer a system that doesn't need to exhaust out of...
Thank You very much.... this will get me going in the right direction....
Thanks again,
Kent
Hi Greg,
Just a couple of quick follow up questions.
After re-calibrating everything on the machine, and doing some testing of that haas brand ( maybe the issue? ) 1/2 inch end mill it looks...
Hi Greg,
the only field that I want to clear out is the "probe type" column. All of the rest of the tool offset data will stay put.
I have close to 75 tools in my list, and If I had values set...
I want to import data into the "Probe Type" field which is in the tool offset screen on the haas controller, but I don't know what data field name to use in my G-code.
It's going to be looking...
Just a quick update on this.... I did some playing around, and it looks like if you press the ORIGIN Button while you are on the Probe Type column it will give you the option of clearing that whole...
I want to create G-code that will load a value into the "Probe Type" column. on my Haas DM-2 Mill with classic controller.
The machine is looking for either a 0, 1, 2, 3
Just for reference,...
My 2016 Haas DM-2 has the classic control panel.
Is there a way to clear or set all of the tools to a "0" on the offset probe type ?
What I want to be able to do is use the Probe all tools, but...
Thank You very much for the great Info... It has been some time since I calibrated the tool setter, so that is on tomorrows To-Do list.
I followed your suggestion and removed the figures in the...
In my Cam Software ( Fusion 360 ) I typically use a nominal tool diameter ( example for my 1/2" would be .50 " ) verses the exact measurement of the tool at that point in time.
What I would like...
From time to time I want to do a quick measurement on a work piece to check the width or depth, and I use the slow method of probing the left side of the piece and writing down the that number from...
Thanks Greg,
I checked the owners manual and it looks like the previous owner purchased rigid tapping, but not the Macros and other options you mentioned.
I went ahead and put the Macros /...
Ok, I just found it... ( it was in the common section in the parameters on the second page down the list )
When I turned mine to a "!" it allowed it, but it has a "T" behind it, so I'm assuming...
I have a Haas super mini mill with a pre NGC and I'm trying to figure out if I have the macros option on this machine. ( I purchased this machine used )
I've turned on my emergency lock.
Then...
I am just starting to dip my toe in the water as far as adding my probing code into my programs ( verses manually running my probe when needed )
So I just wanted to post the generic code that I...
You did a GREAT JOB of putting this video together....
I have some 3/8 dia injection mold ejector pins that i need to square off the ends, and I would like to use my CNC to do this, so they are nice and flat on the end verses trying to do it on a bench...
Thank you everyone for your suggestions.
About the time that this popped up I was doing some heavy side milling, so that must have been when it happened.
But to be safe I will take the...
I have a bit of a mystery in the shop this morning... I had my 1/2 inch 4 flute end mill suddenly cutting about .20" to deep on a piece. (It actually cut about .07" down into my soft jaws )
This...
I will have the same issue... this program has 240,988 lines of code in it, and I just checked and the line number "N5000" that was just above the one I'm trying to search for was repeated 35 times...
Thanks for your help...
I had to attach it, verses pasting due to forum restrictions
I like your suggestion, but when I went to try this I discovered that there isn't a quotation symbol on the haas keyboard.... ( I searched all of the keyboard and I see it has most of the common...
Yes, I think your are spot on in your suggestion on the numbering... ( I am using Fusion 360 for creating my g-code, and I know I can turn numbering off, but I will have to do some digging to find...
Yes, thats the feature I am using ( absolutely love that restart feature ) but the issue I am having is trying to search and advance to that point in the G-code where the machine stopped.
In my...
From time to time I need to restart the cnc in the middle of a program,... ( for example if my machine alarms out on low air pressure do to my air compressor that shuts down expectantly from time to...
Thanks Landy,
I swapped out the Humphrey Valve and that did the trick..... Back up and running at full capacity!
Thanks again...
Kent
I have been having an issue on my umbrella style tool changer on my Super Mini Mill where there is a slight delay at the end of the tool change. I just changed my air solenoid valve ( labeled "A" on...
From time to time especially on tools that are going to be running at RPM's in the 10k range I have been receiving alarms right after a tool change as the tool rapids down to the work piece.
It...
Just an FYI for anyone looking at this... I have owned two of these Phase Perfect units and they are really nice units.... I've had one of my units for about 5 years and just purchased a second one...
We were having issues on our Super Mini mill, and once we installed new springs on all of the sliding covers on the umbrella tool changer it really helped with the issue of the chips getting onto the...