Search:

I had to buy a new computer since the shop computer died.
I'm having issues finding an app that will work.
I used web machinist and want to keep using it but every time I try to download it, it...

does anyone know what would cause the M contactors to not push in?
The machine will start up fine if I push all m contactors in manually but they will not stay put otherwise.

the fluid level is still the same.
the only thing that I can think of that would cause anything was my air compressor took a crap and I got a new one.
the guy that installed it forgot to put on a...

I do have the prints.
The io board input says the hyd (cant remember what it is exactly) is turned off. when I press the m3 contactor I can here the hydraulics turning on but get some kind of servo...

I am getting a alarm 39-9.
this alarm says that this alarm is cause by one of two conditions
1. an attempt was made to start the machine hydraulics and the signal for hydraulic pressure switch is...

So I don't what happen but what I did in my confusion I spun the turret about 20 or more times and got the turret adjustment mode message. after that it is running

The waiting did not get rid of the al 60 code that its throwing

how do you tell if the driver unit is powered on?
I checked the back of the machine and there are only 4 breakers which none of them are tripped.
im currently waiting for the capacitors to...

I have a kia turn-15 with fanuc oi-t controller.
The machine was crashed yesterday and started with a z axis torque alarm. I got that freed but now have an al-60 index turret power off alarm.
...

I have a hawk 150 that has been idle for a month now. my father passed away and I inheriated his machine shop. I usually run the kia lathe but need to learn to set up the hawk.
My father has a step...

It turned out I was going way too fast. I turned my speed down to 135 and it was doing just fine. I had a squirt bottle of coolant spray as I was counterboring. The only issue was that the counter...

yup still nothing

So I have a part made of 0-1. There is a through hole of .516 and and counter bore of .770. I have a HSS drill that's 33/64 but it seems that the o-1 is just destroying it? Is the o-1 just too hard...

I am currently trying to hard turn right now and have not ran into this issue yet. normally the parts only need 2 grand to come off after heat treating. These parts need about 8 grand for depth and...

I have a part that has a diameter of 4 inches, 1.5 inches long and with an ID that's supposed to be 2.626 inches. the current ID is 5 grand over. I'm just curious if heat treat will be able to...

My father passed away and he was the only one who knew how to run this edm. I was wondering if anyone could walk me through the steps of how to set this up? I know absolutely nothing about it and can...

I have tried doing this. When I shut the machine off and turn it back on I am able to hold the standby button and it will work but it will not do anything after this and will have the same operator...

Where would this be located on the machine??? I have never looked behind the machine but I do know that the spindle motor is on the left side of the machine if this is what you are talking about?

FANUC series oi-t
kia turn 15

Ok so I am getting a no. 2007 AL-7 troque alarm. what happen was I was setting up the machine for the workshift 0. I went to go get some coffee and my brother...