Search:

Made enough progress on bench testing that we have started integrating into the machine. Still need to plumb and wire the draw bar and the travel switches. Then should be able to make some test chips...

serial port on the VFS5 and MotionLink plus software.

Small update: I now have x, y, and z under full control. I have got the spindle where I can control if using a work around. At this point in time the VFS5 boots into the wrong control mode for the...

A buddy and I are currently retrofitting an Arrow 1000 with a Centroid Oak board, I have the X, Y, and Z functioning properly. We have the spindle to a point where it can be controlled by the Oak....

Video of the Oak running the X-axis.


http://www.youtube.com/shorts/TKK_a1ye75o

Upon purchase/pick up....

I have a schematic pack but I don't feel like I have everything. If you have the full schematic pack digitally that you'd like to share id be interested to see if you have things I don't. I have the...

Aside from Pete's Adventure I found several people interested in but no follow up on retrofitting a Cincinnati Arrow. I much like many others found myself in possession of an Arrow, specifically a...

Thanks for advise. Them all being off is why I feel I'm missing something obvious. I'll go ahead and test that with a meter as all I did was a visual. Any illustration as to which exact trace(s)...

I've been slowly repairing / restoring an Arrow 1000 that was given to me. With some help and parts from Fives I finally have the machine fully loading into the A2100 system.

Now I am being...

While the machine is still non-operational, the issue of this thread has been resolved. I replaced the HDD with an updated SSD unit from Five MSI and the machine now boots into the Acramatic...

Small update: I have been going back and worth with Greg at Fives. Currently awaiting a new hard drive to arrive. Should have an update on if problem is resolved once it gets here.

yea if he can hook me up with the configs for both and it resolves everything ill post the this symptom and the outcome into the other thread and close this one. Hopefully I'll soon be past this...

Thanks. Yea I have been leaning more and more to Bios configs being the issue. I was able to back up the HDD this weekend and have another HDD to clone it to on the way. So I am more comfortable...

Thanks. I only had those photos of the Bios numbers. I will have to go grab photos of the current settings but that shouldn't be a problem.

I have a machine that had dead RT and WS board batteries. I've replaced the batteries but do not think I have the bios configured quite right. I was hoping someone could provide me the configs for my...

Ill have to give that a read. I followed the bio settings i found on some other threads. I know that there was several different boards through the years and claims of different settings needed for...

I also figured I would post up some pics of the machine when it was received and moved inside the shop. I would like to see the X Y and Z axis move and the spindle spin up. I am willing to invest...

Finally got a chance to up load some photos of what I am working with
...

I was contemplating that. I did not want to start messing with things on the drive until I know I have a good copy of it. I'd hate to not have a reset button if things got worse. I should be able to...

Ok now I'm with you. There is only the one 2gb HDD and no hook up for a second one.

When I go into file manager I can see both the C: and D: partitions on the HDD. The program appears to be...

I am not sure I follow.

I received a Cincinnati Arrow. Quick summary to this point. Unsure of overall condition. Had it checked by an electrician and wired in. When I first tried to boot it, it had a bridge board error. I...