Private message me :)
Type: Posts; User: FrankCNC
Private message me :)
https://we.tl/t-oKMhPGjTcd
New Link to Viewer
https://we.tl/t-4YAYTzFlBr
Attached is a Fanuc 20IT XZCY Axis Lathe Post with Sub Spindle.
Carefully read the notes at the beginning of the Post.
Hope this works for you, let me know if any changes needed.
Regards.
Hi,
If you only want line numbers at the Tool Change and nowhere else remove all the N[N] codes in the Post using Replace (Find and Replace text),
then search for the $80 section of the Post and...
Yes, I realized my mistake and let thread author know, must of had a seniors moment :(
Short answer Yes, AlphaCam doesn't seem to swap G41 and G42 on mirrored Toolpaths with Cutter Comp.
IF you are mirroring the Toolpath and using Cutter Comp then the mirrored Cutter Comp will be on the wrong side of the component
and either cut smaller or larger depending on the Comp used....
When you have a Workplane selected the Part and Toolpaths of that Workplane can Only be rotated around any selected point on the Local XY plane of that Workplane (Yellow XYZ Trident), When you cancel...
Can you save the AlphaCam Drawing as an AlphaCam 2019 R1 or earlier if possible as it won't open in 2019,
Thanks
Hi Mike,
Sorry I thought the Previous questions where only about Toolpaths, can you attach your Alphacam drawing file and explain what you are trying to do so we can help.
Cancel Workplane, you have a workplane active while trying to output Toolpaths, goto the WorkPlanes Tab and find "Cancel Workplane" then toolpaths will be output as Global coordinates, you will sget...
Here is a link to an installer for AlphaCams standalone Viewer, it only opens AlphaCam files for Viewing. Regards :)
https://www.dropbox.com/s/2bapc1mqoyq1u7c/Alphaview_Setup.exe?dl=0
Hi All,
chasing parameters for a Mega H-400GA CNC bandsaw as m/c has lost it's data
Cheers
Open the Post in AlphaEdit for editing then search for $1000 section of the Post then make a new line under the $1000 line with the following code
MOVE_NEEDED (6,0,0)
then save post and then...
Can you Post your Drawing (.ard) file and Post Processor so we can see if there are any anomalies in the Post that are causing this issue.
Just change the extension on the .ard file to something...
Does it display a message "some toolpaths are hidden. NC Code will NOT be output" before the "WARNING: NC-CODE NOT SAVED" message. If it does then you need to add the following lines to your Post...
Hi,
Here's a link to the correct version files...
https://www.dropbox.com/transfer/AAAAAKwP9VbPYEfX67c3yEfF6GwIBKleNHJ1y5fRSLbxhKSj6vlUU6g
Download and move to folder Program...
Right click on the relevant tool path in the "Operations" tab on the Side Bar (Project Manager) then select "Edit" then click on "Change Tool" then select new tool from tool menu and left click with...
AlphaCam won't drill a hole thats not a full circle, just draw another circle at the centre of the semi circle to use just for drilling then hide it if it's in the way.
You most probably also need to join the elements in your profile to create one continuous machinable profile using "Join" in the "Edit" Menu which should close the geometry.
Click on "Edit" then...
Hi Alexsandr,
You need to clear your PM inbox so you can receive more PM's
Regards.
Hi,
Attached is a Post I wrote for a 3-axis OOYA Drill/Mill Bridge type machine with a Siemens 810M Control.
There will be some machine specific code that might need changing to suit your...
To suppress the comments set $540 section of Post from 0 (zero) to 1 (one)
$540 Suppress Operations List, START and Comments in NC code (1 = yes, 0 = No)
1
unfortunately this also suppresses...
Use the "Output Cad" option in the "Home" tab of later versions of AlphaCam ( can't recall where it is in earlier versions ), select "File Type" usually DXF for 2D or IGES, STL, Rhino for 3D.
...
Hi,
The easiest way is to just hard code it in the Tool Cancel $70 section of the Post overwriting the existing N[N] M09 with
N[N] G0 Z80 M9
N[N] M5
N[N] Y0
N[N] M0
or you could also set...
Goto Machine --> Tool Directions
Select CW or CCW for Directions
Select Outside, Inside, Left or Right for Side
Then click on the Closed geometries you want to alter the tool...
My Apologies but that later Winxiso needs these 8 Dependencies in the same folder to work :(
https://www.dropbox.com/sh/j0gr7x0tum5f8p9/AAAn8eO6kAlpR7-ErZADKxzia?dl=0
Hi,
If you place code similar to the following in your AlphaCam Post Processor the WINXISO.exe will run after the post processing of the NC Code and place the .PGM file into the folder where you...
Hi,
Save the .anc file as a .txt file and use WINXISO.exe to convert to .PGM
Help File Link: https://www.dropbox.com/s/gxbhdtz76ub72zt/Convert%20program%20to%20PGM.rtf?dl=0
Exe link: ...