Hello, the controllers that I have are a "DC2-71U" and a "DC2-90U." Doesn't look like either unit is capable of torque control.
thanks
Bob
Type: Posts; User: bob.mullikin
Hello, the controllers that I have are a "DC2-71U" and a "DC2-90U." Doesn't look like either unit is capable of torque control.
thanks
Bob
Hello, I think I've got it in just speed mode. Should I try torque mode?
Thanks
Bob
Huh, try this:
https://literature.rockwellautomation.com/idc/groups/literature/documents/um/dc2-um001_-en-e.pdf
Hello, I've converted my Shop-Task Shopmaster Eldorado hobby mill/lathe combo machine to DC treadmill motors. I'm using Reliance DC2 motor controllers. One for the mill spindle, and one for the...
Hello, I've converted my hobby mill/lathe combo machine to DC treadmill motors. I'm using Reliance DC2 motor controllers. One for the mill spindle, and one for the Lathe. The motor controllers work...
I was having the same problem just today on a project. When you are in the Tool Store and you have chosen a tool, check the "Stepover, Rough, and Finish" settings. In my case, I set Stepover to 1/2...
Saw your post today. I see that it's from quite a while ago. If you still need an answer... In the cam screen you will see your operations. Just right click on the one you want to save and a...
I'm hoping someone may be able to help me with a problem I'm having. I've been using Turbocad v16.2 for some time now along with the cam package v3.5. When I create a cam routine, I can see the G...
This seems kind of messed up. I finally figured out how to make the lathe contour, and created a turn routine. I tested it on my machine and it was feeding on the z axis instead of the x axis.
...
Okay, I found out how to switch from mill to lathe. I've set up a couple test routines, but I can't seem to set up a simple "turn" routine. I've gone through the wizard, set up the part, the tool,...
Link doesn't work.
Hello, I'm hoping someone can help me with this. I've been using Turbocadv14.2 along with the cam plugin v14. I have made several mill programs and today I wanted to build a lathe routine. Problem...