We have 12 Swiss machines up to 20mm and have always used Iscar Do-Grip part off tools. We are bringing in our first 32mm machine and I would like to know what part off tools you use on your 32mm...
Type: Posts; User: Ohbeewan1
We have 12 Swiss machines up to 20mm and have always used Iscar Do-Grip part off tools. We are bringing in our first 32mm machine and I would like to know what part off tools you use on your 32mm...
G79 is used as a peck drill cycle on all Nomura machines.
Z = absolute depth of hole
I = 1st peck amount in incremental from start position
K = subsequent peck increments
A = clearance to bottom...
You may already have your answer but the Nomura Swiss machines use an optical tool setter to set the turning tools in the removable holders prior to mounting on the machine. It is great for changing...
We have 12 Swiss machines (Nomura) from 13mm to 20mm and we use a 35 Deg diamond (.008R) tool as a primary front turning/profiling tool because it also allows us to chamfer up to 55 Deg on the back...
We run a number of Nomura Swiss machines from 13mm to 25mm and have always used primarily the SCHR style of Iscar back turn tools on most of them. We use Mitsubishi for a deep cut back turn tool. ...
WHAT MITSUBISHI CONTROL DOES THE MACHINE HAVE?
Below is the lead-in lines for a NN-13SB program. These are the lines that precede your first tool call (typically 1st tool call is for a front turn...
9801 PROGRAM FOR NN-13SB - WITH FACTORY GRAVITY BARFEED
%
O9801( )
$1
G113
M5
M17G99
G28U0T0
G28V0
Hello - we have a cnc job shop with a mix (20 machines) of milling (3 & 4 axis), turning (2 axis) and Swiss turning ( 5 - 8 axis) about 30 years now. I have read this site for probably 5 years. I...