Hello
Im looking for the Service manual, or the Users manual, for this old machine in the picture.501863
Type: Posts; User: geast1967
Hello
Im looking for the Service manual, or the Users manual, for this old machine in the picture.501863
It should be in Root directory. C:\. If its not then you have to create it.
You have to contact the machine builder, for the password.
You better contact direct to Syntec to that email,[email protected].
Regards.
The default password is 520, if it is not then you will need to consult to your machine maker/seller.
I send the two binary files OE1 and OE2 to a person here in the thread you will find his email, and he did the conversion. I don't think fapt ladder I can do it.You need to combine the two files OE1...
You need to run Fapt ladder I.
Go from main menu to menu "F4 - DISCOMPILE", then input the ROM format file name, like : ROMFILE.#EX and the source file you want to be created, like: LADDERFILE.#LA....
Yes. Tell me what you need.
Dragonbikes, please clear your inbox, i can't send you pm.
Yes i can help you, but what i did was with Ladder I.
I finaly managed to send the PMC programm via serial. The problem was that the ms-dos directory was not shared and for some reason i don't know the fladder gould not initialize the com port.When i...
Ok i did not check that. I will do it on Monday and lets you know. Thanks for the tip.
It's a standard ibm compatible pc running pure msdos 6.22, nothing else.The serial port is checked, because i could receive the parameters send from CNC.
Is this the case also with fapt ladder for dos, runing on a standard pc with serial port?
I try to download a ladder i wrote for my machine/compile with a fapt ladder on a standard pc with serial...
Is this the case also with fapt ladder for dos, runing on a standard pc with serial port?
I try to download a ladder i wrote for my machine/compile with a fapt ladder on a standard pc with serial...
If you find a working machine like yours and with the same controller OM, you can copy the two eproms. The PMC program listing should be in the documantation of your machine. What does the machine...
Go to config-> Motor tuning, down left you will find it.
Hello.
I need to input the machine parameters to an old NCE-280 esab controller.
Does anybody now how. I have all the parameters in a hardcopy.
Regards.
Yes please if you could send me the contact i would be greatfull..
Hello everyone.
I have an old mill with a Syntec 900ME controller and i need to alter some machine parameters.
The problem is that when i want to change anything it ask for a password, which i...
I'm doing the same thing in my ML3. Here are some pictures.412470412472
Well i try a usb extender, not the one sugested but a cheaper version with rj45 ftp cable but with no luck.
Hello.
I need to connect the kflop/kanalog to the pc via a long usb cable >15m.
By doing that i get disconnection problems very often.The kflop/kanalog is powered from the pc power supply, via a...
Somebody had removed the screw. Finally i managed to remove it. Thank you Al.
I don't know, could be, but i look inside the hole and could not find anything wrong. Anyway is there a way to remove the broken encoder somehow? What if i drill the hole all the way down will this...
Well i could not find any alen head screw in the middle...
Here are two photos369262 of what is left from the encoder....369258
Thank you for your reply.
Is there any instructions of how to change the encoder.
I could only remove the three screws which hold the encoder to the motor body. The encoder shaft is somehow...
Hello everybody.
I have an red cap Fanuc motor which the pulse coder is brocken. My question is, is it possible to buy a new pulse coder and change it, or i have to buy the complete motor?...
Thank a lot for the reply "drdos". I was able to display the pmc ladder diagram by enabling parameter #60.1 Now i have another problem.
I can't see parameters 300 to 499. When i'm changing pages on...
Those where the first buttons i tried with no luck.
Thanks any way.