hi everybody,
i have set an oem password for our 8040 fagor controller and i have forgotten it ,now i can't modify the parameters, is there anybody know how can i find the password, i have heard...
Type: Posts; User: is_razi
hi everybody,
i have set an oem password for our 8040 fagor controller and i have forgotten it ,now i can't modify the parameters, is there anybody know how can i find the password, i have heard...
i have the manual,and i know about tracing the plc program ,and i have done that,but if you've noticed i asked that how can i trace the plc program while i am sending the commands like S,M,T to...
hi grindley,
thanks for your reply,but don't you think it is easier to save the plc program and parameters in a storage like hard disk and use it to reload the program to the cnc controller when it...
hi there,
we have a problem with the 6RA2620 dc drive ,when the drive is enabled and commanded to supply the motor , the motor rotates some few turns but after a second ,or less, the drive lights up...
hi buddies,
can somebody guide me about monitoring plc function in tnc155.there is a tracing function for these controllers but when i call it,i can't command cnc to do something as i am tracing...
hi everbody,
i want to backup the plc program of tnc155 controller,can somebody guide me to do that please.which soft i must use ,i have a soft named tnc155 version6, but i dont any option to...
hi dovi,
i have found sinumerik 802c a cheap , user friendly and easy to programming control specially if you are acquianted with siemens PLC's .if you are asking me i advise it.
:cheers:
thank you kcho,
can you also send me the electrical diagram for the code you have send.
regards
dear kcho,
can you send me a sample diagram and plc program written for it for a CNC lathe with a fagor 8035 cnc .
thanks.
no it does , 802 series has 3 member 802d 802C 802C which 802d has digital output for digital drives , 802S is for stepper motors and 802c has analog outputs for controlling speed of analog input...
hi everybody,
i have recently bought a russia made cnc lathe. i want to retrofit it with a sinumerik 802c baseline controller . i decided to use the original drives of the lathe which accept analog...