Time for UGS?
Type: Posts; User: swisscheese
Time for UGS?
I don't get why coordinates don't change when I jog and why the Work coordinates don't go to zero when I click to zero them.
This is a nose cone of a toy glider. I'm trying to figure out how to make a similar one. It is hollow, ~5" long, with a wall thickness of ~.014". Notice the D shape at the tip and the small round...
Does anyone know of some liquid that can be brushed onto a metal surface, dried and then marked with a 1 watt blue laser diode? I tried Dykem blue machinist layout fluid but it did not mark. I don't...
Now I see from your video - right click RefPkt - did not occur to me to right click - suggest to make that command more discoverable.
Another issue - router is skipping circles of diam .126 with a...
My latest frustration is about offsets. Before a run I have to move the spindle far away from the stock and zero there but it makes it very difficult. How can I zero to the corner of the stock...
Hi GrblGru
How can I specify to drill at center of circles. The tool path is showing at the edge of the circles. Using 3.36.0.
Also I am trying to route .126" holes with a .125" router but the...
@GrblGru - just a 3" circle.
Link is for audio of GrblGru (sounds like a musical instrument) vs GrblPanel (smoother).
https://drive.google.com/drive/folders/1VD9ENWuIN8qI2EObHZxKuhBTXBW6quCk?usp=sharing
Jogging is fine. When I run a program dry it sounds a little rough.
@GrblGru
That was it - finally got is going! Thanks. Did not cut anything yet. On a dry run the steppers sounded a little rougher than usual - is there some setting to check?
Here is a video: https://drive.google.com/file/d/1Yl9j13nFq6URlB6TH6T6X1x7CcKO2ecf/view?usp=sharing
https://www.cnczone.com/forums/attachment.php?attachmentid=399576&stc=1
You want me to send you settings from GrblPanel?
Now I see "Error: Open Sio @ Port COM4" but the other day I think i saw it connecting. USB is plugged in, power on.
When I type $$ I get an unhandled exception and says "port closed"
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
...
Here is the screen after connecting - seems it does connect.
https://www.cnczone.com/forums/attachment.php?attachmentid=398932&stc=1
Here is after the jog attempt (after "Grbl error 15 ... Jog...
@GrblGru
Decided to try using GrblGru instead of GrblPanel but jogging gives error "Grbl error 15 ... Jog target exceeds machine travel".
I found some "!" in the language file but mostly in comments - did not seem like removing them would help. Is there a particular line?
Where do I get V3.28.9 ?
As for using GrblGru intead of...
Thanks - now I see multiple selection on the drawing works correctly - that will work for me.
I figured out the toolpath problem - I had my 3/16 EM with diam 6.35mm which is 1/4"! My bad.
My...
@GrblGru
Go into Windows file manager; hold down the Ctrl key; click on various files - some more than once. That is how mutiple selection is supposed to work.
Also, why is the U notch in the...
Now I have another problem. Grbl Panel stops in the middle of the GrblGru program for no reason. I found that if I delete exclamation marks (!) in comments that GrblGru generates it resolves the...
With your suggestion I found the problem. I had my tool setup wrong. I had number of flutes at 0 and width at 2 - should be 2 flutes and 0 width. Suggest to improve defensive code / error reporting.
187 tool: Milling, Endmill, 6,35, 0, 10, 2, 2, Yes
I never got anything to work - just learning it.
As soon as I open the project file I get:
See the end of this message for details on...
Can anyone advise why I can't run the simulator on following file:
https://drive.google.com/file/d/1ArQGrLj8qxvpAtYBHQY9mvcMW13aKwEB/view?usp=sharing
Using GrblGru V3.28.1
I'm getting a lot of...
We have an old Bridgeport clone in our shop that's making a real racket.
Video of the noise:
https://www.youtube.com/watch?v=hmElkK3i1RQ&list=UU7u0iKvm0NXCeI5-S5ILFHw&index=2
Partial...
Does anyone know if most CNC mill shops tumble parts after machining or just ship parts in the machined state? We usually tumble but have some customers who prefer the machined look and we wonder...
There is no confidence issue here. We do indeed stand behind our specs. If we missed something in QC please provide the nominal and actual value and number of parts involved - surface roughness in...
We are sorry the parts you received were not what you expected. The CAD software indicates that you need to specify a surface roughness if that is what you need. This is done in the Settings dialog...
Gar: I agree - doesn't really matter what form the software is in. I understand the situation now. Thanks.