Search:

Anybody have one of these I have 2 of them for training at the shop and would like to ask some questions.
Thank You

496430

I have a Mazak quick turn Nexus 250 II with a LNS Quick Load 80 bar feeder works great lathe runs great but when the lathe sees the end of bar at the M69 it jumps to the sub program 9999 it will run...

maybe your part is not flat

Thank for the help this is just what I was looking for

Hi Guys
Hope someone can help me I am a new MC user using Ver 7 doing a 2D High Speed (2D Dynamic Rest Mill) I have a 2.5 dia hole I am milling it out to be a 2.515 square with .5 radius in the...

may just be a type O but try removing the space GOTO4000 Not GOTO 4000

this is what I get when you push the CUSTOM key

209444

Here are some pics 2 are what you see when you push graph 1 is the ez-guide screen 1 is like my other machines

We got another used 2007 Doosan VC400 Fanuc 21i-MB it has the EZ-GUIDE-I turned on what I am trying to do is get back to the normal Fanuc screen like all our machines is this possible. On our 2013 Oi...

Well it did take a ladder edit to fix it I sent them my ladder they edited it an sent it back now when I set QNI to 0 it stays seems like the newer a machine is the harder they make it to use.

This is odd with the Q setter up I change QNI to zero put the Q setter down and I can move to a different offset but when I raise the Q setter back up it changes QNI back to 1 by its self

Just got a new 2013 2600sy Fanuc 31i with sub live tooling the works and when you go to measure tools on the probe you bring the probe down it jumps to the offset for tool that it is indexed too on...

Every time I have seen this in the past it was switches on the tail stock If I remember right it has always been the switch that shows that the tail stock is clamped

This is what I use change the 4 to the number of holes that the drill drills per part then put the max number of holes you want to drill in register #520 when the count in #504 reaches max number in...

What kind of training classes are provided is there a web site I can go to look at whats available

I think that the value is held in parameter 254 write dwon what you have in 254 and the change it to what you need then push F2 again to see if you get the new value you keyed in. Glad to see that...

If you cant get the other work offsets as Fordav11 said you could use his idea and a G10 to rewrite your offsets or if you have macro programming on your machine you could you use that to rewrite...

See there that’s just the type of attitude I am referring to you’re a very smart guy and have helped a lot of people but sometimes you and others mistreat the less experienced people you even did it...

Sorry but there is not a nice way to say this but some people are just becoming Jerks and acting like this place is Facebook hiding behind their computers saying things that they would never say to a...

I am sorry I am not trying to nit pic just relating on my experance here on our harding it has to always run from in X&Z home operators will try to open the door before it gets home and the interlock...

I dont mean to sound harsh but any operator that just starts the machine back up after pushing reset and not making sure everything is in the right place to start needs to be looking for their next...

Here is a finish pass for a 3/4 ball this should give some Idea of what you need tool nose is allready figured in.
%
O0000
(35 DEG. INSERT - VNMG-431)
G0T0101
G97S3600M3
G0G54X0.Z.15
G50S3600...

The ps 100 just means PWE is a 1 turned on the 3 servo errors with the not ready flashing make me think the machine is not powered up all the way, is there an Estop pushed some where is the another...

Can you put a \ in front of your wait code then turn on block skip?

When you measure tools from the Qsetter in X you are telling the machine the machine where center of yor part is for that tool thats why you dont need the G54 X when you measure you tools in Z on the...

I am a little confused reading my book now only thing I can think of now is to put the amount of parts you want in Parameter #6712 if that dont work hopfuly someone will jump in and correct us.

Originally Posted by Mikey4865
I have M99 at the bottom and it runs continuous but it still disregards the parts counter. It will count each part but it will not stop until the machine alarms out...

When you say it counts parts do you mean the lathe or the bar feeder I ask because you say in your last post that the count on the settings page was zero. if the lathe is not counting go to Parameter...

if you go to your settings page there is a place to set parts required do you have that set to the amount you want to run

When using the Qsetter I dont think you need to use the Tool Measure hard key or type in X0 or Y0 you just touch your tool off the probe tell it beeps or the light comes on it it should put the...