Search:

Have you tried this postprocessor already? https://github.com/teodoryantcheff/SolidCam-Mach3-Post

Here you go: https://github.com/teodoryantcheff/SolidCam-Mach3-Post

Only thing I did not manage to solve yet is how to do multiple operations in one gcode file. The @start_of_job section is...

Hi Ron,
I do not see a possibility with the G540 only.
It will probably require a microcontroller in between. E.g. To act on a direction input pulse and control the CSM1000 reverse function...

Success !!

After a lot of try and error and with the help from John here at #cnczone.com I was able to interface the CSM1000 motor controller with my #Gecko#G540 controller and control the speed...

Thanks a lot for the help John. I got it to work after playing around with the circuit and changing some parts around the input. :banana:

Next I will get the final 10V power supply which I want to...

Thanks John,
That would take care of the min voltage
However would it solve the voltage drop issue once the vfd is connected (see my previous post and the circuit I posted).

Thanks,
Eric

Update to the update:
I found some interesting info in the Taig Group on Yahoo. The VFD is a CSM1000 equivalent.
Speed is typically controlled by an optical sensor connected to the VFD. If the...

Hi John,

thanks again for the suggestion.
I tried with a 10V battery and here is what I get:

Test 1: Signal line not connected to the VFD.
Measurement between GND<>G540 VFD OUT after voltage...

Thanks John. I will give this a try.

Hi there,

I have recently upgraded my mill with a more powerful motor.
The motor is a 750Watt Servo Motor from GlockCNC. It is (at least from the pictures) identical to common Sewing Machine...

Update to my post above: using the dev post processor in github has fixed my drilling issues. Now I just need to get rid of the tool change at home position entry which I guess is a setting in SC.
...

Ok. Thanks for the reply.
This is very interesting. I thought I have an issue with Mach3 but this points towards a setting in SC.

I went through all the SC settings and also checked the...

Hi guys,

first of all: AMAZING WORK and thanks a lot for doing this. Big thanks to Jailbreaker how's post processor I'm using now.
I have tested the post processor on a 3 Axis Machine and had...