Thanks for all the help, I can now jog the motors! I had everything wired up correctly before, the problem was resolved once I upgraded to 2.8. It's very possible that the motors were jogging...
Type: Posts; User: Matt99
Thanks for all the help, I can now jog the motors! I had everything wired up correctly before, the problem was resolved once I upgraded to 2.8. It's very possible that the motors were jogging...
Thanks for the help! Unfortunately, the alternative wiring didn't do the trick. I now have two motors and drivers hooked up separately with the following wiring:
1. Mesa 5v TO Microstep Driver...
Thanks so much for the suggestion! I did change the step time from 1000 to 5000 ns. Unfortunately, after restarting LinuxCNC, it still didn't allow me to jog the motors.
Matt
New to the CNC Zone and performing my first CNC build. I’m having some trouble and nothing I’ve tried so far will allow me to jog the motors through LinuxCNC.
I’m using a Mesa 7i76e as the sole...