I was just looking at that German's work on the Fadal stylle belt setup yesterday! I would absolutely love to run such a setup, but would want to shoot for an even higher RPM, say 10,000 peak. Your...
Type: Posts; User: DeilyCa
I was just looking at that German's work on the Fadal stylle belt setup yesterday! I would absolutely love to run such a setup, but would want to shoot for an even higher RPM, say 10,000 peak. Your...
Ralph - I love you. This is the exact information that I have been looking for. In my case, I cancelled the order of my particular 610 - mainly because I did not know I could do this - and it was NOT...
This looks like a very versatile drive, but unfortunately it only has a max 1500W rating. This motor is 3.34 KW. Would it be possible to run this servo with a VFD? I have heard of some people doing...
Hello, I recently purchased a parker Compumotor Z610 for use as a spindle motor on my CNC build. I had my eyes out for a while looking for a lenze servo, or an equivalent, and this motor looked to...
Luckily I managed to dislodge the gib. After many hours of cussing and questioning my decisions, I tapped it out with a flathead and a hammer. The entire mill was caked in transport grease. Had to...
Hello, I recently acquired my PM25MV from matt with the intentions to convert to CNC. I began to tear down the mill, and tore down the x&y axis without many hickups. When I came to the Z axis, I...
Hello! I am currently searching for both a CNC lathe and Milling machine. For my application - the Dyna Myte 2800 mill and 3000 lathe is the perfect size. Unfortunately they are quite hard to find! I...
Wow, that is very impressive. Thank you for getting photos for me! I would be interested in hear more about that tool changer. Is it of your own design?
CL_MotoTech, That grizzly build up sounds interesting. Do you have any photos of the mill? Would love to look at them.
Hello, I understand in the past there have been discussion on Taig vs Tormach 440 - my topic is of the "Taigmach". For those who have not heard of Taigmach, it is the title that John Socha Leialoha...
The f15 seems to be what they are focusing on right now, but they also offer the f8 - @ 14,000. Tiny travels though - 8x8y10z. At the same price point as a tormach 440 deluxe, and it seems as though...
Hello, first post on CNC Zone! The topic is on F-CNC Machines, which I am surprised there has not been such a forum post yet. This machine seems to be targeting the high end hobbyist / job shop type...