Ok guys that did it. The problem was the super duper expensive shielded usb cable that I got. Everything is percolating as advertised. Thanks to all of you who helped me with this problem.
Type: Posts; User: healinhand
Ok guys that did it. The problem was the super duper expensive shielded usb cable that I got. Everything is percolating as advertised. Thanks to all of you who helped me with this problem.
I’m using a shielded twisted pair I got from our avionics shop. Grounded on both ends. Shielded power wire. I’m also using a shielded usb cable, but no ferrite beads. I’m sure I have one though. I’ll...
Ok, I received the new adapters, plugged everything in and started spindle talker and everything works as advertised. I opened uccnc typed s24000, enter. 24000 appeared in the box. Hit start, the...
Thanks guys. I ordered 6 more adapters. Maybe I’ll get lucky
Do you have a preference and maybe a link?
no. It just continues to send commands, but nothing is received
I've tried 2. from 2 different sellers. I guess I could try ordering more.
I think I've tried about everything
pd001 is 2
pd002 is 2
pd004 is 400.0
pd163 is 001
pd164 is 1
pd165 is 3
[Screensetsettings]
mainscreenfilename=2017
splashscreen=0
[axessettingscontrolX]
Axisenabled=True
Stepportnumber=1
Steppinnumber=2
Steppinnegate=False
Dirpinnumber=3
Dirportnumber=1
plugin is hy12
plugin is hy12
ver 1.2049. Its set to 2451.everything seems to be functioning correctly in screenset. diagnostic shows the spindle is on, you can vary the rpm with the slider. but the vfd doesn't seem to be getting...
I’m running screenset and at present I still can’t make this work. I ordered a new vfd thinking that might be the problem but still the same. I installed spindle talker and it shows it’s talking, but...
What’s the best hy vfd part number for a 2.2 spindle?
I guess I m really lost. The PIN number I’m trying to use is the PIN number on the 4660
Green and blue lights on, jog working fine
Mx4660, uc100. I’m trying to setup proximity switches, I guess I’m just retarded. I go to the axis setup page, put in the pin #, hit enter, apply settings and the entry goes back to 0. Any help...