Search:

Kitamura tends to daisy chain the e-stop through the limit switches. There is usually an override button on the left most side of the row of switches on the operators panel. Hold that switch while...

If anybody else has this problem let me explain what we found out.

Apparently these Yasnac Controls can get themselves into a state where the parameters change but they just don't register. We...

I have a MyCenter1 with the same issue. Yaskawa is no help at all. Kitamura is no help. Parameters do not like to update at all on my machine. There is a switch on the CPU board that must be in...

I'm hoping someone out there can help. I have a motion problem with my machine and am trying to set parameters so I can see the actual spindle RPM to determine the problem, I'm also trying to turn...

Hope someone recognizes this issue. Currently I'm getting the Kitamura to Yasnac (yaskawa) it's the otherguys problem runaround. My machine is I believe a 1997-1999 era machine with Yasnac...

If you go into maint mode you should be able to jog the arm back into position. Check to see if there are chips around the home position sensor that makes it think it is in home pos.

Hello all,
We recently purchased a 97' CL-15 With Yasnac LX-3 Controls. I am adding an auto parts feeder and need to change the motion inhibit with the Chuck open parameter. I have the Operations...