504,054 active members
4,645 visitors online
Register for free
Login

Search:

Type: Posts; User: Hellbringer

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    116

    Re: UCCNC Display Analog Sensor Data

    Thanks!

    My original plan was to use arduino or raspberry pi to measure and display on a small LCD so that is probably what i will do, but just curious

    Thanks Again
  2. Replies
    3
    Views
    116

    UCCNC Display Analog Sensor Data

    Hello,

    So i have an idea and i want to see if it is possible in UCCNC

    I recently had a questions about amp draw on some servos. Got the questions answered but thought it might be cool to have a...
  3. Replies
    3
    Views
    294

    Re: Help Figuring Out How Many Amps

    Thank you guys!!
  4. Replies
    3
    Views
    294

    Help Figuring Out How Many Amps

    Hi

    I am working on rebuilding a CNC mill and i am planning to reuse the servos that are installed.

    The X and Y are both the same and the plate lists them as 146V DC and lists pulse amps?? not...
  5. Thinking UCCNC Conversion of 1985 Falcon F1

    I am looking for a little advise. I bought a Falcon F1 that has been converted on Mach 3 some time in the past. It is currently running the following,

    Galil DMC-4153 Motion Controller
    Servo...
  6. Thread: Encoders

    by Hellbringer
    Replies
    2
    Views
    215

    Encoders

    Hello!,

    So i am starting VMC retrofit, the machine is from 1985 and currently has analog drivers and encoders and i am looking to switch them out to digital step drive setup to use Mach3 or UCCNC...
  7. Replies
    23
    Views
    4,995

    Poll: Re: Mach 3/4 vs UCCNC vs Linux CNC

    Yes, the DMC-4153 is made by Galil, and reading it, it does look like it is analog

    I can always replace the encoders with a digital encoder and switch to a digital servo driver.....

    Thanks
    Mike
  8. Replies
    23
    Views
    4,995

    Poll: Re: Mach 3/4 vs UCCNC vs Linux CNC

    That is a good question, i dont know if it is analog or digital....

    It looks like the previous owner did convert it to Mach 3, and right now it is running a DMC-4153 motion controller, i will have...
  9. Replies
    23
    Views
    4,995

    Poll: Re: Mach 3/4 vs UCCNC vs Linux CNC

    It is a 1985 Vulcan which is a re branded Kasahara Falcon K-1

    Yes, i am planning on reusing the servos and drivers
  10. Replies
    23
    Views
    4,995

    Poll: Mach 3/4 vs UCCNC vs Linux CNC

    Hello Everyone,

    I just bought a VMC that i am going to convert and i am looking for opinions as to which software to use.

    Features i am looking for

    20 Tool ATC
    Probing
    Flood Coolant
    4th...
  11. Replies
    3
    Views
    420

    Re: HELP! Need Help Removing Servo

    Thanks guy!
  12. Replies
    3
    Views
    420

    HELP! Need Help Removing Servo

    I need to remove a Y Axis from a VMC, and i do not know how motor coupling comes apart.

    The machine is a Vulcan which is a rebranded Kasahara

    Here are some pictures of the motor coupling
    ...
  13. Replies
    2
    Views
    592

    Re: Matsuura MC-500V in Home Garage

    Awesome!, Thank You!
  14. Replies
    2
    Views
    592

    Matsuura MC-500V in Home Garage

    Hello,

    I have the ability to buy an MC-500V. Good price, it is local, and from what i have read, they are good machines. My plan is to rebuild it and convert it over to Mach 3.

    Million Dollar...
  15. Re: HELP - Wiring C10, Charge Pump, and Spindle Control

    If i am hooking up the EN and the Estop to the second relay, how do i get the C10 to output the signal to turn on the relay?

    My understanding of the C10 EN is if there is no voltage, none of the...
  16. Re: HELP - Wiring C10, Charge Pump, and Spindle Control

    I know the wiring that i have now is wrong and that i will have to rewire it.

    Here is the how to hookup the Charge Pump to the C10

    http://cnc4pc.com/Tech_Docs/1_C1GR4_1.pdf

    Now in that...
  17. HELP - Wiring C10, Charge Pump, and Spindle Control

    Hello Everyone

    Little background, I have a CNC router and I am using 5V from the computer power supply to power all the board (c10, Charge Pump, PWM Control board etc)

    The problem i am having...
  18. Replies
    9
    Views
    2,335

    Re: Servo Problem - Not Running Smooth

    I think i figured it out after posting this and i am going to test today, The motor is a reverse winding motor. the original mfg of the table ran the motor into a gearbox which reversed the rotation...
  19. Replies
    9
    Views
    2,335

    Servo Problem - Not Running Smooth

    Hi,
    I have been working on this cnc controller for weeks now and i have solved some of the problem but there is one i am having trouble with. First off here are the specs

    Renco Encoder
    MagTek...
  20. Replies
    1
    Views
    320

    1/2" Shaft Server / Encoder Problem

    Hi,

    I am retrofitting a CNC router table and it has servos that have a 1/2" shaft. I am using the Gecko G320x drivers and i was going to use the CUI AMT102-V Encoders, but they only go to 8mm on...
  21. Replies
    2
    Views
    9

    Router under $1500

    Hi,
    I am looking for an "entry" level table top style router (Looking for 2'x3' or so) that is under $1500. I have a complete set of steppers, drivers and computer so all i need is the machine and a...
  22. Replies
    3
    Views
    500

    Heat Tolerant 3D Printing Material

    Hi,
    I am thinking about getting a 3D printer to make some parts for a project but i need them to be somewhat heat tolerant (about 110 - 120 deg C). at that temperature they can't soften or start to...
  23. Replies
    5
    Views
    8

    Yes that is a concern when it has the ability to...

    Yes that is a concern when it has the ability to pull 75A but i would guess that it would pull less then 10A at any given time so i think a heatsink and a fan (which you can also buy from these...
  24. Replies
    5
    Views
    8

    Will This Work As A Spindle??

    I saw a youtube video where a gentleman made a spindle out a motor from an RC Helicopter so i did a little research and if my math is right wow i just want to make sure i am not going crazy.

    This...
  25. Replies
    1
    Views
    459

    Best Way to Wire Steppers

    I am running KL-4030 drivers with 8 wire 425oz/in steppers (Also from keling) and i am curious, what is the best way to wire the steppers to get the most torque?

    Bipolar (Series)
    Bipolar...
Results 1 to 25 of 139
Page 1 of 6 1 2 3 4