We have released our KL7 Series at BobsCNC. Come take a look. We would be happy to answer any questions!
https://www.cnczone.com/forums/attachment.php?attachmentid=435214&stc=1
...
Type: Posts; User: rlwoodjr
We have released our KL7 Series at BobsCNC. Come take a look. We would be happy to answer any questions!
https://www.cnczone.com/forums/attachment.php?attachmentid=435214&stc=1
...
These are our KL755. We do not have these available for production, but we use them to make the KL744 and KL733
https://youtu.be/GRhJgDyyM7g
We put this drive in our KL7 Series CNC routers at BobsCNC. I love the cleverness of this design.
https://youtu.be/GRhJgDyyM7g
I have been working on this design for over 2 years. I have always liked the Bell-Everman servo drive. It is a clever design. The ball screw on the Z makes for smooth operation. I have listed the...
Hello, My name is Bob Wood and I am the owner of BobsCNC. I got hooked on CNC machines 12 years ago. My first machine was made from MDF and had aluminum rails with UHMW slider bearing. I have a...
We are pretty excited about the new engraver we have in the market.
http://www.3dprintforums.com/attachment.php?attachmentid=1528&d=1474649481&thumb=1
CNC Engraver with the DeWalt DW660 - Album...
The E3 Engraver is finally for sale. Check out the Amazon listing or the listing in our store.
The assembly manual can be downloaded at: E3 Engraver - BobsCNC is a small family business that sells simple and cost effective CNC DIY Router and 3D Printer kits that are designed and manufactured...
Thanks, you do not need a lot of space for the power supply and stepper drivers.
I love mine. I use LinuxCNC but the changeover is pretty. Remove all the electronics except for the stepper motors then add modern stepper drivers and your favorite CNC software.. My mill is at...
We uploaded a video of the E3 CNC engraver making its first cuts.
https://www.youtube.com/watch?v=DouMC8fR_Nc
We are pretty excited about the new engraver we are bringing to market. It should be out by the middle of next month (Oct 2016)
...
Getting close to a production run of the KL3 CNC Router. The details can be seen at BobsCNC
This is a 4 axis board and would work a 3 axis machine. The board is made for the Arduino. I have used this shield with DRV8825 stepper drivers without the Arduino connected to a LinuxCNC machine on...
I think it would be difficult to build a machine for under 200 euros unless you have sources for used parts. What parts do you have available?
I built a 2 axis bit holder for my dads mini lathe. It bolted to the table in front of the lathe. The rails system will need to be pretty stout due to the tool needing to be cantilevered to get to...
I have engraved aluminum with the 45 and 60 degree bits. I had cut depths of 0.01" to 0.015 " with the feed rate of 15 to 20 inches per minute.the trick is to not have the aluminum weld itself to the...
Testing begins - I uploaded a couple videos on YouTube. Please visit BobsCNC often for updates.
275548
Free Shipping for the Rp9 Deluxe 3D Printer Kit in the Continental U.S. Just enter in the coupon code "ShipForFree" during the checkout process.
BobsCNC products are designed and produced in the...
BobsCNC.com is working on a small CNC router - First prototype is built and durability testing is beginning. Production tooling in on the way.
The current design is an CNC mill cut aluminum frame...
Free shipping through Dec 1st. Only 5 available. Enter in the Coupon code "FreeShip"
BobsCNC products are designed and produced in the USA.
We use a combination of imported and domestic...
Don't miss out on this introductory offer. This kit normally retails for $158.
BobsCNC products are designed and produced in the USA.
We use a combination of imported and domestic components...
Don't miss out on this introductory offer. This kit normally retails for $158.
BobsCNC products are designed and produced in the USA.
We use a combination of imported and domestic components...
I have designed a 3D printer that I will be selling on Ebay. I also have a small CNC router in the works. Check out my web page at BobsCNC - Home
256166
I adjusted the delay to optimize the look until you cannot see any flickering.
Single side board with jumper wires on top. See attached gcode files. M for mill and D for drill.
Thanks, I have thought of making a complete gcode interpreter and step/direction generator, but I have to many projects....not enough time. This board has serial connection so it could me modified...
Dave has said that for awhile...any news on when it will be done?
That is too funny. I do not have any problems with arcs, but the constant velocity always sounded good...not so much for the mill, but I also have a router.
I like DOS in the shop.
Yes it is. Boots in a few seconds...