Search:

Problem solved...

Hello,

Need to drip feed my Mitsubishi Meldas 530mr control on a Mighty Comet, I have been receiving a L01-C-link error? while trying to use parameter #46(Host Link) / tape mode...Any help out...

Works great thank you Doug.

Ford,
G83 works great, thanks for the info.

Hi,

Trying to program/ G-code a drill on the lathe , deep hole drilling having the drill rapid out of the part to clear the chips and rapid back to feed position.

Help please.

Hi,

Trying to program/ G-code a drill on the lathe , deep hole drilling having the drill rapid out of the part to clear the chips and rapid back to feed position.

Help please.

Yes thank you, G83 works great for a Haas, I am using a Fanuc control?

How do you set up drilling parameters for X5 lathe?, trying to post deep hole drilling.

Thanks in advance.

Hi,

Trying to program/ G-code a drill on the lathe , deep hole drilling having the drill rapid out of the part to clear the chips and rapid back to feed position.

Help please.

Mitsubishi Meldas 520, so we installed a new control board and lost our coordinate and tool offseting function with the hand pulse generator, we have to manually enter the offset value instead of...

yes full circle arcs, everything is checked and reloaded as your picture shows. I am doing a contour ramp routine. posting segments?

I changed the settings on the control manager and tried to refine my NC path nothing has changed? could it be something else?

ok, lost here, posting with MasterCam X5, doing simple -Z-contour ramping routines. The post out file is segments of a circle making the post file very long and poor surface finish on the part? How...

Velocity Deviation? any help out there, machine resets by it self during a cut?

Thanks in advance

Super thanks, I will try the usb point, we are running XP, the master cam launcher recognizes then dongle?

Well, my seat of x5 is corrupt? even after re-install the logo comes up but the program shuts down all togther. I have x4 installed on the same machine and it works fine? any ideas?

Chucker!! thanks for the tip, the macro parameter was turned off for some reason, we turned it on and the program runs fine!

So we had our program running correctly on a older hass no problems, and now we transfer our same program to a newer haas 2008 EC1600 and the control alarms out on the # sign??, this is the line it...

I am working with a custom programing software that generates a gcode program with sub routines, this program runs fine on a mitsubishi control and we are trying to transfer the product to the haas....

OK,

Trying to run macro with sub routine on a Haas and the alarm is multiple codes on this line G91 F#1 G90 F#2; is there anyway around this on a Haas, the program runs fine on the Mitsubishi...

Thank you for all of your input.

Have not talked with them yet, will do so soon. Thank you for the reply.

We are in the process of Die Casting some of our Aluminum parts but having a hard time Hard Anodizing the die cast parts and am not sure what grade alloy they are using

I was wondering if you...

We are in the process of Die Casting some of our Aluminum parts but having a hard time Hard Anodizing the die cast parts and am not sure what grade alloy they are using.

I was wondering if you...

We have a Haas EC1600 with thru the spindle coolant. When using TSC the coolant turns on but the spindle stops and is waiting? The alarm states low TSC coolant?, but the sump is full? does anyone...

problem solved thank you

AB Tools Inc

will make it to your specs.

Go into settings/config/screen and check the box disable hardware acceleration this will cure your problem.

Thank you Kevin!

thanks camsys