Search:

Nevermind, i figured it out:

1-Curves from edges->Proiect to ucs
2-Select Curves for boundaries-Island-Select the curves you've made
VOILA!!

How do you do that? :D

Hello,

I need help!!! :D, I want to machine the purple surfaces except the pockets, and fcm keeps plunging into them even if i checked those surfaces as "Check Surfaces", please help.......

Dear Miki,

Can you send me the PP for Doosan Puma 2000SY?

Many Thanks!

Ok, hope you will find it!

Many thanks!!

I was wondering what is the USB Device on right of the LAN Cable is used for?
http://www.cnczone.com/forums/attachment.php?attachmentid=368982&stc=1

Dear Friends,

Can you help me with a post for the machine mentioned above, or something similar for Fanuc .
Machine has Y,C axis, with subspindle with A axis.

Many thanks!

Hello,

I need help for machining the surface from below pictures.
im also attaching the step file for part.

I was thinking on using an 16 mm diameter insert tool (high feeed mill cutter) and...

Hello,

Has anyone done it? i need to know the iso code for an example.

Many thanks!

Many thanks!!!

Hello,

I want to make a thread relief like in the picture bellow, using a cnc lathe, but i dont know how to do it, can you please advise with a solution?

Many thanks!...

Hello

I need a PP for Fanuc 0i-MF for the 5 axis setup as shown in attach.



Thanks!!...

Hello,

As the title says, i want to know if its possible to use the PCMCIA card as an extension memory, run subprograms from it, but i dont want to extract the card all the time, i want to use the...

Dear Perfect Circle,

Using FC has great satisfactions!! nice parts and brainstorming!! you will live 1000 years!!

Now, i need help once again, the client wants to use a 90 Degee mill in order...

Before you fly away, good captain, can you please tell me the steps so i can do this myself....and also if you can redo this for Metric :D

Many thanks!!

Many thanks, i will try and recreate what you just did...hopefully i will figure it up and do it myself :D
:cheers:

I need some documentation that will help me manufacture a gap gauge, for my engineering licence, the diameter is Ø40 j5.
Many thanx!!

Thats exactly what i want from my tool list, you can send me via [email protected], much apreciate :D

Oh, nvm, i edited the PP and it worked....

So i have different milling sides that i make with 1 tool, but the program combines them into 1 program, and i need a separate program for each side.(finish 1 side, retract to Z, start the other...

you can send me via "[email protected]" ty!!!

Doesent matter, i just want to gain acces to nc code tab :D

Can someone help me with a pp for turn/mill?

So, short story, a client asked me if i could make 3 programs for 3 parts that needs Turn/Mill on a CNC Lathe, and he said that he will pay me...the question is: how much can i ask for these programs?

The thing is that the code is inserting something that i dont want like aditional tool name "TwistDrill, EndMill etc", diameter and so on, and it wont show the Tool Numer in front of tool name....

Hi guys, i need help regarding this:
(DATA-3/4/2015 - REV.0)
( TOOL LIST )
( TOOL NAME )
( U-Drill D21 TwistDrill 21.00 80.00 1 )
( HSS.F D20. EndMill 20.00 100.0 2 )
( C.E...

I noticed this also..linear ending will insert the N...odd :D

Here, give it a try:
268554

This is how my post procces looks like:
<IF><TCAN-START><THEN>
N<SEQ><PRO-COMP>
<ENDIF>
<IF><TCAN-END><THEN>
N <SEQ-END><PRO-COMP>
<ENDIF>
<IFNOT><TCAN-CYCLE><THEN>
{<COMP-STAT>}
<ENDIF>