I am guessing that the z axis will make bad noises and might even move. Just wire it like the other 2 phases on the motor.
J
Type: Posts; User: JIMMYZ
I am guessing that the z axis will make bad noises and might even move. Just wire it like the other 2 phases on the motor.
J
Check out Montronics, have used them on Mission Critical Cuts.
jz:)
on page 387 of the 18i maintenance manual (b-63005) shows haw to read the parameters in the control to narrow down possible problems, ie. overvoltage,overload alarm, regen,....
first check for...
fanuc control type? 18mc,21t, 10m. 409 alm on a 16,18i control is axis torque abnormal. what machine is this on.
john
If you want a straight up comparison call bob at performancemachinetools.com, 27 years in the machine tool biz.
later
John
Performance Machine Tools In San Leandro. 888.438.0501 Talk To Steve.
John
This is common. You probably have a bad connection on one of the 4 stepper motor cables. This sounds just like what i have learned to track down. My ahha system does the same thing.
LISTEN TO GER, its much easier to do the right thing now and add the parallel port. Ask me how i know.
listen to metalmuncher.(nuts)
m19 C Probably wont work unless you have live tooling and a indexable or full C axis.
as for the chucking, use m68 or m69 to open or close it. If you want to do it manualy, from the m01 or m0 ...
My 8f Bridgeport Drive Died. Looking For Schematics For The Board And Motor Switches What Have You .
John
I may be able to answer questions about this companys machines.
dont know what that smiley icon is but clicked on it anyway!
Hitchcock?
Hi erik,
check the fanuc parameters. usually a keeprelay change denotes which type of turret. my daewoo is the same way.
jz
CHECK THIS
CASWELLPLATING.COM
LOTS OF KITS w/FREE TECH HELP.
JZ
al You are the man. I Have many fanuc control manuals on cd if you everneed.
THks jz
I am having trouble finding parameters for custom macro B, despite finding them for most controls that I dont have. The machine is a Daewoo 200c. Any help is appreciated. I can get around in the...
Hi All,
I looking for parameters to custom macro B. I have all the manuals and know the fanuc control , but this one i cant find. I can find parameters for the o-m and o-t but not the 18T. All...