I don't think so.
Type: Posts; User: qualitytool
Please check your turret gear box oil ours got coolant in the gear box oil from the coolant nozzle spraying out and did damage to the cam plate.
Just call HAAS and get the parts you need all plug and play m08 &m09 will work. For my tl-3 2 wires and a receptacle about $90.00
I have a complete v-20 manual you can have send me your address I will ship it to you. Eddie
My 2000 vf-2 is happy with 99" hight Eddie
s1950 will not drive the spindle needs a m03/m04 eddie
I have a costumer who up dated his AutoCAD v2011 to v2012 now I can’t open his drawings in bobcad v21 or v23 any help would be appreciated Eddie
i use sandvik and love them eddie
I had the same thing on my hl-4 the fans that cooled the control cabinet were not running took them out and cleaned them put them back in no more ggggggggggggggg eddie
:confused:
has any one used v-22 bobcad to dnc drip feed? i can't set the baud rate higher than 19,200 to slow to dnc i ask bobcad about setting to 115,200 that i use in my v-21 this is their...
had mine charged by factory service he used a tank and hose cracked valve on tank very slowly to charge cylinder
I had to replace the cable to the remote box it was not cheap
i bet he is not useing G43 h (tool number)
my keypad failed on my hl-4 easy to replace
follow the g71---------- with a g70 to finish id/od
my vf-2 1999 model will just hit my 104.5 celling in one spot @ FULL Z a small place can be boxed in to to get the 3.5" you need :)
i ordered my tl-3 3-24-06 to be shipped 6-02-06 man do i need it now (chair) (chair) (chair)
just purchased new tl-3 6 to 8 weeks delivery :)
the e-stop could be locked down -turn to unlock if not check alarms and alarm history if no alarms it could be the keyboard is bad
you need to push power-up restart to get the maching going eddie
has any one been able to get any better price than list on new haas cnc machines ? buying a new loaded tl-3 eddie