Would someone post the procedure for changing out the belleville washers. I know mine have been in their a long time and probibly need replacing.
...
Type: Posts; User: bl409
Would someone post the procedure for changing out the belleville washers. I know mine have been in their a long time and probibly need replacing.
...
Since we were new customers we were not in their database and we gave them the machine serial numbers and went from there. Our machine has 12" cylinders top and bottom. We move the media from one...
We bought our hone used. We contacted extrude hone about buying new media and they told us that we would have to have our machine inspected.
They wanted to send out a tech to inspect our machine. ...
I still have not found anyone that has media for these except extrude hone.
I am willing to buy it from someone that already is an extrude hone customer but I have not had any success with that...
This alarm is an overtravel alarm. It is telling you that the x axis overtraveled. Good Luck, BL
I have 2016 that has a dc vf5c rotary table that is getting a little old so I purchased a used one of of ebay. It has the same plug and seems to be pretty good mechanically. The one I purchased...
I have used the SMQ stainless for several years in my citizens and I think it is the best stainless on the market. We also run some brass, as well as copper and bronze thru my citizens and have had...
When you send programs to the Haas machine you should start and end with a %. I chased this for a few days before I figured it out . I use Bobcad and at the bottom of the send window it asks you...
When running the coated carbide inserts on a cnc lathe it does not seem tp matter a lot if it is 11L17 or 1117 but on a screw machine running form tools it makes a tremendous difference. Just my 2...
I have used both 12L14 and 1117 on CNC and Screw Machines. On a cnc 1117 will cut just as well as 12L14 with a better finish most of the time. On a screw machine the 12L14 runs a little better...
Thanks for the info TC. I will give these sources a try. Let me know how you first run of media works out. BL
I am trying to find anyone using a extrudeHone machine that would sell me some media. Extrude Hone will not sell it direct to me unless I have them come in and inspect my machine. Any help...
Scanfab,
I had a cable go bad with a vh5c DC rotary. I had a local Fadal Service Guy come in and take A look at it. He checked the connections and then rewired it the opposite way it was hooked up...
Scanfab,
Have you checked the connentions where the cable attaches to the motor and resolver wires? I have have some bad connections at that point before and it caused several alarms. You might...
Hey,
I was wondering if anybody out there had experience running a mazak dual turn 20 or multiplex? We have just gotten a used machine under power and I was wondering if you could tell me how to...
Dan,
I would do all of the turning on the main spindle to keep the part as concentric as possible but I have done turning on the sub with good results. You have to remember to figure in the part...
If you are facing a new bar with a right hand tool you should not need a shift as the end of the tool should be at Z zero. BL
We have 8 acmes on the floor. I average have 1 running out of the 8 every week. They are still good machines and very productive for the right jobs.
I am having to slowly move them out to make...
Ken,
Are you trying to knurl 3/8 diameter? If so some times you need a different pitch knurl for different diameters. With some knurl pitches and some diameters they will not track correctly...
I personally do not like that style of holder as I cannot change them as easily as some of the others with in the gang holder but I think the quality is good. BL
Engine Guy,
I am continuing to push forward with V22 and making small advances. Have you used the training videos? If so do you feel they are worth the money. Thanks BL
I was very happy with bobcad V21. I have been using Bobcad since V17.
I would like to see them go back to a similar system. I have not been able to use V22 at all. I always try to do a job on it...
I had a similar problem with our VF3. The pressure sensor was leaking and it also had a leak on the z axis saddles. You can take your broken sensor to your local auto parts store and find a...
This is just a suggestion but it may work for what you are doing.
I would suggest that you run your cutoff tool almost al the way thru
your part and just leave it hanging on by a small stem then...
We have an IEMCA MINI BOSS 325 on the L25. The Factory grippers for loading the barstock did fair. I think it would probably have worked better If we had made some better grippers for loading the...
I have run rectangular bar on my citizen L25. I had to have a special collet and bushing made and I had to turn the end of the barstock to fit one of my feed fingers. Synchronizing with the sub was...