Hi guys, i need your help again,
ive just aquired a Camtech 5 x4 machine which i have started retrofitting with servo motors and ball screw on the Z.
Im running the same set up below, however...
Type: Posts; User: D_Man
Hi guys, i need your help again,
ive just aquired a Camtech 5 x4 machine which i have started retrofitting with servo motors and ball screw on the Z.
Im running the same set up below, however...
Hey Guys,
I need help setting up the table orientation on my software. At the moment it seems all over the place and im unable to lay a part to cut and find out which way its going to cut
At...
Ok ive checked the drivers software and its states the following
P12 & P13 are both set to 1
here is the link to the manual https://app.box.com/s/9vy3306emuzd6kiu45gi
How do i do this? i can see they have a Ethernet port on the front of them, but worried if i plug into it, it may short something out
Thats Great minicncuser! now down to 0.5mm out! im getting closer haha asked it to move 10mm and it moved 9.5mm
Thanks for that Gerry! I think I must of been going off the Pulleys...
However, with 500 steps/mm it moves 11.3mm when asked to move 10mm. is there a way of dialling this in further?
Hi Guys,
I've come to the point of my machine where i need to start setting up the CNC software. my setup consists of the following...
CPU5A4E Advanced 4 axes with Ethernet - Eding CNC - PC...