Search:

Hi Guys.

After alot of troubleshooting and a CNC repairguy missed it, i found 2 cables that a mice had chewed over:mad: The worst thing, was that the CNC guys, had beed ind that installation, and...

Yes, tomorrow we will messure if the signal arrives on the connection plug og the I/0 board. The odd thing is, that it actually need to be both counter signals that has to be cut off.....otherwise...

Hi Guys.

I have a problem with my YAM MV 3 A with Fanuc 0M.

Out of the blue after i started it up the other day, the tool magazine just keeps rotating, when i call a tool. No alarms No nothing....

I´ll make a video and put i on youtube and i´ll make a link to it here... but there will properly go a couple of days, before i have the time for it.

Hi All.

The problem was that the cable from the controller to the cabinet with alle the drive was disconnected.

I got it to work, but i cut the RS232 cable so it´s only 0,8 meter, because off...

Yes, i figured it out meanwhile. Thanks anyway.

Hi Guys.

I´am trying to get file transfer to work on my Fanuc O M.

It seems like i can´t get to punch the "O"... it punches "7" ??

Could i have changed at parameter by mistake tha enables...

I have now recived the cable, and i am trying to set it up.

I tried some diffrent DNC softwares, and changed some parameters, but now it seems like i can´t punch in the "O" anymore, it´s Punching...

Hi Al.

I a, not getting any hits with that Item number. Can you drop a Link?

Hello all.

I have just bought an older YAM MV 3A (YANG) with a FANUC 0M controller. It´s the last of 3 0M models (Machine is from 1993)

I need a cable to connect from the RS 232 port to my USB...