584,837 active members*
5,315 visitors online*
Register for free
Login

Search:

Type: Posts; User: DouglasR

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    545

    Re: ST30 Lubrication Pump issues

    Thanks!
    Yeah, it's for the spindle.
    Seems to be operating to specs in the manual now. I adjusted a parameter.
  2. Replies
    2
    Views
    545

    ST30 Lubrication Pump issues

    I have a ST30 lathe and I've recently jumped up the lubrication pumps on the machine to get more oil flowing to the spindle bearings.
    This worked and I saw that the lube oil level go down and the...
  3. Replies
    1
    Views
    1,344

    Re: Puma 4100 gear boxes

    I used to work for them, and never heard of a spindle gearbox failing.
    Were they crashed hard in "Z"?
    What exactly happened?
  4. Replies
    2
    Views
    1,249

    Re: DOOSAN DAEWOO PUMA 150G

    That is a Mitsubishi controller. Contact them for the parameter setting needed.
  5. Re: Doosan Puma 5100MA issue with program O9014

    The G310 has to do with the tailstock positioning macro that's factory installed.
  6. Replies
    2
    Views
    1,742

    Re: HiT 18S with HiTrol Parts count

    GREAT!!
    Many thanks!
    How do I get it to loop back and run another part?
    In other words, repeat a program until the part count threshold is reached?
  7. Replies
    2
    Views
    1,742

    HiT 18S with HiTrol Parts count

    Anyone know how to set a part counter on a Hyundai HiT 18S with Hitrol (Siemens) CNC?
    Thanks!
  8. Replies
    3
    Views
    1,040

    Re: PUMA 2500Y Tailstock Jammed

    Have you tried M12/M13?
    Sounds like a stuck valve or perhaps a prox switch
  9. Re: Puma 5100XLMB gets PS0021 Illegal plane select when polar milling

    Helical is standard from Doosan, but the Polar isn't made for that.
  10. Replies
    1
    Views
    845

    Re: Doosan DVF5000 alarm 2233

    There is a utility in the control that will show what is wrong in the spindle.
    If it's just a temp sensor or prox switch, it's a simple affair.
    One reason your boss may not want anyone touching it,...
  11. Re: Puma 5100XLMB gets PS0021 Illegal plane select when polar milling

    I don't think the machine can do what you want it to without a Y axis.
    Polar interp is for the milling of non round shapes on the front (snout) of a part.
    It has limited value elsewhere.
  12. Re: Doosan Turning machine ejector engineering flaws

    Perhaps design/make your improved ejector end and sell back to Doosan?
    As you probably know, they've just been bought out (again) so the new owners might lend an ear.
  13. Replies
    1
    Views
    677

    Re: DEAWOO PUMA 200

    You may have a wiped out pump.
    But, check breakers and fuses in the rear cabinet first.
  14. Replies
    8
    Views
    1,353

    Re: Daewoo Lynx 200 Startup not ready

    Check for blown fuses.
    Also, make sure none of those push button breakers are popped.
  15. Replies
    1
    Views
    1,004

    Re: 2120 Alarm Doosan Puma MX2000ST

    OK.
    It shouldn't come up during automatic operation.
    Make sure that none of the ATC switches are in manual mode, including the manual ATC release button.
    Make sure the ATC door is fully closed as...
  16. Re: Running a program through memory card/Laptop

    OK, to run from Memory card is easy.
    On the card, the program should be "O1000" with NO file extensions.
    Program on the card should have a "%" above the O1000 and a "%" below the M30.
    On the CNC...
  17. Re: M198 subprogramm call from Channel2 Puma mx2100

    Go to Channel 2 parameter settings and make sure the I/O is set to "4."
  18. Replies
    76
    Views
    47,152

    Sticky: Re: GE Fanuc & FANUC proprietary posts

    Even better. Much of it had to do with a court case in the aftermath of the Toshiba scandal. The Russians had specified Kongsberg controllers on the machines and when inspected they were in "three...
  19. Thread: Need help

    by DouglasR
    Replies
    2
    Views
    1,145

    Re: Need help

    Fanuc will not allow it. It must be run from internal memory, PC card, data server, or LAN/RS-232 drip feed.
  20. Re: Doosan lynx temperature sensor availablility

    It does have the option. Expensive, like around $15k, but it can be done.
  21. Replies
    3
    Views
    1,517

    Re: Daewoo Puma 2500SY Y axis reference lost

    Try manually moving the X axis way down on the travel, then move the Y way down. Make sure the turret is clear of both spindles.
    Then, home Y first, then X.
  22. Replies
    1
    Views
    1,600

    Re: Servo 300 Bar Feeder Blues

    Found the issue - finally.
    Haas bar feed parameters are on a sticker located on the feeder itself. Problem solved.
  23. Re: Daewoo Puma 2500SY 2005y M88/M89 spindle clamp doesn't work

    If you don't have documentation, call Doosan in Pine Brook, NJ.
  24. Replies
    1
    Views
    1,600

    Servo 300 Bar Feeder Blues

    I'm having trouble with my Haas Servo 300 bar feed.
    It's attached to an SL20 lathe.
    Up to a few weeks ago, it was running fine, but now when the pusher rises to allow a bar to drop into the...
  25. Replies
    1
    Views
    982

    Re: Looking for Daewoo Ace h500 manuals.

    Call Doosan (formerly Daewoo) in Pine Brook NJ. Manuals and diagrams are recorded. They can tell you who your distributor is and it's not that expensive. It will save you A LOT of headaches.
  26. Replies
    5
    Views
    967

    Re: Puma 400XLM Automatic Q setter operation

    Ok, if there are cycles in there, there has to be documentation. Check your Doosan (not Fanuc) operator's manual.
  27. Replies
    5
    Views
    1,246

    Re: Switching gears on a Doosan Lathe.

    I'm not sure that button is live or not on Lynx.

    The "P" word is essential. If you wanted to stop the main spindle, it would be "M5 P11."
  28. Replies
    5
    Views
    967

    Re: Puma 400XLM Automatic Q setter operation

    OK, so there should be a macro to auto set the tools.
    I'm wondering if it isn't already hiding in the CNC's memory someplace.
    Fanuc 32? 31? i?
    Look in the directories, there may be one.
  29. Re: Doosan puma 1800ttsy turret indexing problem

    Darryl Hardt is the one.
    Sounds like its lost its orientation.
    I think it's an easy fix.
    Email him - [email protected] - tell him I sent you.
  30. Replies
    5
    Views
    967

    Re: Puma 400XLM Automatic Q setter operation

    The machine will not index the turret or rapid traverse, if the tool setter is activated and in the down position.
    Does your Puma have the motorized tool setter?
Results 1 to 30 of 384
Page 1 of 13 1 2 3 4