Siemens owns the A2100 controls and can still service and support much of the A2100 parts. Contact them at 800-879-8079 or [email protected]
Sent from my iPad using Tapatalk
Type: Posts; User: jcruthers
Siemens owns the A2100 controls and can still service and support much of the A2100 parts. Contact them at 800-879-8079 or [email protected]
Sent from my iPad using Tapatalk
Yes it is possible
Sent from my iPad using Tapatalk
You can download a trial package of 808D on PC software to run on PC here: ...
Siemens can help with the control repair with parts, repair, and service. Call 800-879-8079. If the machine needs mechanical repair, you can try Trend Machinery. They are a Siemens Solution Partner...
The 808D has been designed to be very easy to use. All the training is available online in YouTube videos. Quick and easy.
Sent from my iPad using Tapatalk
There are many reasons to have multiple channels. For example, machines with dual spindles would use two channels to allow simultaneous machining with both spindles.
Sent from my iPad using...
Call Siemens at 800-879-8079 and ask for tech support. Siemens owns the Acramatic products. Tech support may be able to help you diagnose the source of the error.
Sent from my iPad using...
Looks like a contractor or I/O point for the tool changer may have an issue. Have you check the wiring, contactors, relays?
Sent from my iPad using Tapatalk
Nice parts.
Sent from my iPad using Tapatalk
Parts and repair is available on some of the Acramatic control series from Siemens who owns the product. Siemens can be contacted at 800-879-8079. It is true what peterson76 says in that these...
The Acramatic controls are owned by Siemens. Parts, service, and repair is still available on many Acramatic products by contacting Siemens at 800-879-8079. Siemens also has some economical retrofit...
It is not standard behavior. Sounds like a machine specific configuration issue is conflicting with your program message. Have you contacted the machine builder for their input?
Sent from my...
The Step 7 programming is for the ladder logic that controls functions of the machine but not the motion of the machine. Machining programming is done through G code programs like any other CNC....
You may want to post in a EdgeCam forum to get an answer
Sent from my iPad using Tapatalk
There is not a way to vary the feed rate within a cycle. In the more recent HMI (SINUMERIK Operate), there are ways to define different optimal speed profiles in conjunction with the machining...
Trial versions of SINUTRAIN can be downloaded here: http://www.industry.usa.siemens.com/topics/us/en/cnc4you/docsdownloads/Pages/docsdownloads.aspx
You would want the SINUTRAIN for SINUMERIK...
I can't comment on any alternative power supplies but I can tell you that Arrow 500 machines can be retrofitted with new controls like the SINUMERIK 828D family from Siemens fairly economically. ...
For the record, IES is not an authorized Siemens repair facility. Siemens does repair controls, drives, and motors in the US. They can be reached at 800-879-8079.
Sent from my iPad using...
I would recommend submitting a support request here: https://support.automation.siemens.com under the Ask the Siemens Experts box or post a question in the Forum there. The SINUMERK System 820 is...
ShopMill/ShopTurn is option 6FC5800-0AP17-0YB0. You would probably need to contact your local Siemens organization to purchase this and the other option or go back to the original machine...
The "Extended Operator Functions" is avaialble on both the 828D and 828D BASIC for both the M (Milling) and T (Turning) variants. The option, part number 6FC580000AP16-0YB0, includes a number of...
The engraving cycle60 does not increment serial numbers automatically. It will engrave just what it's programmed to engrave. A solution found on the SINUMERIK forum on the Siemens Service & Support...
You should contact Thermwood for support or the dealer you purchased it from. This is not SINUMERIK control. The drives and motors are Siemens but the control is built by Thermwood. Unfortunately,...
Sounds like you really could use some help. A few questions:
1. Where are you located? Are you in the US?
2. Who was the "guy" that was there? Was he from Siemens, a dealer, an OEM, or...
I would agree with ktmktmman. Contact the machine tool builder and see if what you want to do is possible.
I work for the Siemens CNC business and pulled the case from our hotline. I have your contact information and will give you a call.
Sent from my iPad using Tapatalk - now Free
Do you have a technical support case number for when you called Siemens?
Do you have a technical support case number for when you called the service line?
It appears that this is a Deckel Maho machine from the operator panel. It would be best to contact them to see if they have a set up manual for it as it can be builder specific. It would be helpful...
Additionally if you are in the USA, you can open a case by calling 800-879-8079 which will get esclated to an application engineer in the SINUMERIK CNC group based in Elk Grove Village, IL