Search:

I don't believe that Mastercam is $10k cheaper than Cimatron.

I can't be of much help but I have been around these machines some. There are a number of reason that the system won't start on a mitsubishi edm sinker or wire. When you hit the green button to start...

Yaskawa has many of their manuals posted online for download. I believe this link should help you a bit, around page 30 you will find what the settings can be set to. The best I recall my machine...

I have an mx2 on an mv-jr, it drip feeds without any extra hardware. I am away from home so I can't tell you how to set the parameters. I do remember. It was a bit of work to figure out.


Danny

When I answered the poll I was in error as to what was meant, different geographic areas raise different schools of though regarding terminology. The question where I work would be asked " do you...

Yes, I do own my own resources, and I have for about 8 yrs, do you? I am not a software dealer but I do know a couple, know a few machine dealers as well. I would be interested in knowing if you own...

If you only charge the rate at your job then you are undercutting anyone that is in business, your employer not only pays your hourly wage but also for your benefits package which can easily add up...

Here are a couple pictures, one is of the terminal block I think the wires attach to. The upper portion of the terminal block has 4 wires that are labeled properly (see the photos). the lower portion...

pm sent

Ok, I think I have all of the wires hooked up and am ready to power on the machine. The battery is dead so all of the software and e-packs are lost and I do not have the back up disks. I am looking...

I have just taken delivery of a used 1993 mitsubishi dwc90c. there are a hand full of wires that are either not marked or do not have the same markings as what the terminal blocks do. I will have...

I have a 1992 Agie/Elox Mondo30 that I just bought... here is the rub. I try to power it on and the system doesn't power up. There is a power supply/ relay board that appears to energize the PC and...

Is there a way to test each of these? which would be easier to test first? How would I go about it?


Danny

I am having a problem with the spindle motor or drive. It typically starts forward really slow but will start in reverse most of the time normal. In forward rotation it seems to be under powered,...

I am sure there is a manual way to open and close the tool changer door because there is no external way to access it but I haven't figured it out yet. What I did to get it to close was to turn off...

I just wired up an OKK G4 Graphite mill with the tool changer in the back with a tilt out door. When I turned on the air to the machine it opened the tool change door. I do not have manuals to tell...

I have recently purchased an OKK TRC500 graphite mill to compliment my abilities in electrode design and programming. I would like to design, program, and machine your graphite/carbon electrodes...

I am working on setting up my new to me OKK TRC500 with the fanuc 16m control. The post I have defaults an M50 out with the G5P10000. I know the makino's use M250, M251, M252, and M253 to set the...

I got this figures out, there were a few things I was missing. Where the control was asking for a directory it was referring to a sub directory within the folder that the FTP software is setup to...

I am not sure, I would have to look at the machine. I think shipping would be too much to get the machine out there to you.

I think I would convert the jet mill then so that I could run it manual...

I would watch ebay for "cnc knee mill" they will sometimes come in under the 8k and a simple rotary converter is cheap enough to buy or build. I have seen some really nice machines sell in your price...

How do I get colon ":" in the directory name on the fanuc 16-m control. I found where "string" should bring up special characters but it doesn't. The manual I found refers to param 0931-0935 as...

Could someone explain to me exactly how the data server and the network are supposed to communicate? I just got a second hand okk graphite mill with a 16mc control and a data server. I plugged it to...

I like your screens, they look very clean and neat. I don't have anything to try them on right now but may at some point. Thanks for sharing the hard work.


Danny

Well Sir, I must say your were spot on! After reading what you sent I set out to locate the contactor that sends the brake signal. With a little more help from the manual I was able to locate it as...

I can't help with problem 1 but problem 2 I can advise on. Make sure you have the proper driver for your video card and try adjusting display quality in Cimatron. If your up to date on your...

If it is a drawing I would use dxf or dwg, they both support drawings well. If it is a part file it gets a little tricky with regards to ProE. ProE doesn't like to have multi objects in the same file...

Have you got the brackets for your machine yet? I think I may be helping a friend with some on his mill soon, making a second set wouldn't be too bad. Let me know if you still need some.

Danny

Ok, i have been working on this for a few days. I have the manuals and they explain the magazine timing somewhat. I am confused about a couple things. 1) is there some physical brake other than the...

I have a mori mv jr with a yasnac mx2 control. I changed the tool changer arms from cat 40 to bt 40... this took me a good while in my very little spare time (6 months or so) when I now hit the...