Search:

434883

Hi All, So I just got one of these cards and a bunch of new DM542 drivers and now the steppers are moving great on Mach3. I am down to one problem. I don't have a physical E-stop button,...

433725

Well I did some researching and broke down and bought vcarve desktop and some vbits. The stars are perfect !!!

Hi All,

Finally got my machine working and I have a variety of bits, But I am looking to make a US flag out of pine. I have the dxf ready for the stars and I have done a few tests with a few...

So forever I have been trying to get my cnc machine working. I am using mach 3. I have tried setting up the spped of the movement of the access of anywhere between 800 and 1200mm per minute. I...

So I have the steppers set on 1/2 step. And the screw move 8mm for 1 complete turn. So based on that the are 180 degree motors. It is 200 steps / 8mm = 25 * 1/2 step = 50 steps per mm. I will set...

So I just got all new controllers and new motors. the motors are 425 oz each nema 23 that use 4.2 amps. The controllers are selectable and I have them set on 4.2A and each 2 out of 4 are connected...

just figured it out. since I did not have the bob connected, I had to put D001 and D002 back to 0. Thanks for help. Its working great !!!

By the way, why don't you connect the neutral ????

Ok, disconnected the neutral from "T". How do I get the spindle to start. Do I need the BOB connected or should I just be able to start spindle ????

Hi All,

Well to give you some back story. I was originally using the inverter/spindle with one of the 110 to 220 converters at my old place. Well my CNC was in storage for a bit and we moved. ...

Yes, the steppers are all on, and the spindle controller is on as well. But when I start the spindle in mach3 thats when I see/hear the problem,

Thanks Steven

Hi All, So now that I have my CNC working I am getting this wierd thing happening. As soon as I turn on my spindle , I have a quick click click of the steppers that are causing them to move a tiny...

You are the man !!!

Works great.

PD001 and PD002 are set to "0"

PD003 = 100

Yes the J1 is set next to the terminal.

Thanks Steven

Ok, All wired up. BUTTTT it does not work right. I hear a click when I push the spindle toggle in Mach3 but I still have to hit the "run" button on the VFC. Then it only goes to a freqency of 100....

Ok, maybe I am a little dense. I get that the 0 - 10V go to VI and DCM, does it matter which one goes to which ??

and

there are two place to wire to the spindle on/off. Do I just wire one to...

Hi All,

I have a Smartsain 5 axis BOB and Mach3 and a Huanyang Spindle.

I would like to wire my BOB so it can do the following functions

1) turn spindle on / off
2) revers / forward spindle...