Search:

I have hardinge chnc1 parts for sale . All the electrical parts and some of the air driven parts are getting changed out. Leave a post with email and as I get a chance I will get in touch with you. ...

I'm just bellow Georgetown . The only part that I have to come off is the tool plate air drive. Any thing electric is going to be replaced.

I should have looked at your web site. I'm 25 min north of you.

Have not been around much . Got my Hardinge all stripped down now for the fun part . Trying to put it back together and working right. Torin good to here you got yours up and running. What part of...

if you guys are still looking for parts . i have all the boards ,motors, controller, up for sale from my chnc1 , i am planing on retrofitting to mach3 and ac drives. just not shure
what i am going...

Hi igak

looking forward to the rest of your post on the wiring and reseting of your mach3.

qestion 1 wher did you pull your power for the fan on the motor

I am thinking about using...

hi
good work from every one here .

i have a question and i know that this will sound stupid but here we go.

what about using a wind mill ( like the water pump one from old farms )
and a...

Hi

check with local welding and machine shop's if you are looking for small amount's , what region you would like to shop in would help us get you a better place to deal with.

Hi
every 10 years for retesting ther is a date just like propane.

what size of tanks are you after remember in canada the larges oxy tank is 80 cub foot and acet is 75 cub foot that you can...

Hi every one i don't know where to post this for shure so if in the wrong spot please tell me or movit thanks

here we have a 1985 hardinge chnc1 precision chucker lathe that i am parting out it...

Hi every one

i took the cd 500 back to john at novakon they worked on it for about 3 hours then they found that it was the mother board .

they could every time get it to boot up but they...

Hi every one i have been looking at my nm-200 v2 for 3 hrs now
it will power up the geckos and fans but the cd 500 computer won't do a thing now signal to display.

in the past i have had to...

herd they have a 160 unit coming out it has a better collant system and chip tray under in the cabinet , more slots in table and little bit bigger capacity . these were the points that i thought...

Hi kvom

when i was down at there shop i looked at the 150

the chuck is bolt on to spindel face

to use drills in tool changer you would need a drill socket with side bar to
clamp in ...

vista cnc pendent imach p3

yep it works great i have it on my mill and they were very fast at shipping vista cnc will get more orders from me .

how about 2" hole bore and 24" between centers...

O.k

i have tryed some things the spindel bogges down on my machine in plunge cuts with 1/8" end mill at 4500 and above.
this is tobe an issue with the vfd ( may be )


i have been...

Hi just wanted to know if ther is a way to put a vfd on the wall wire it to a panel and feed multipal machines.

all start and stopping would be done with the magnetic starter on the machines.
...

Hi

im having the same problem 's with spindel bogging down and that is in aluminum with 1/8" ball nose and the problem with it just stopping some where in the program.

those problem are ...

Hi just to let evry one know vistacnc.com has a pendent the same as the one novakon sell's the one i was looking at is $ 240.00 plus shipping

has any one delt with them ?

been waiting for...

Hi the problem with my nm-200 was the stepper on the x axis we replaced that and then we found a bare wire grounding rite at the metal 90 then every thing was good then started acting up so i...

hi i was emailed by rodney to try the stepper on the y axis cable and try that he thinks posable power wire to ground or to other wire

try this tomorow

the float end of the x axis is...

Hi nice machines you have

what voltage and what phases are you running them on.

reason y i ask is i have chnc 1 1986 and i'm tring to figure out if it would be a good machine for on single...

Hi was using my nm-200 for about 3 hours 2 knights ago still having some miner z axis feed isues so i just used the y axis for cutting out the part and the x axis would only have to feed 0.020 to...

you are right dynoray it was ihavenofish that sugsted to go to sherline in ports and pins

hi when my coupling came loose on the x axis it would lose stepps to
the - side and gain on the + side and it would not be the same amount but it would keep adding up on the + side for every cut.
...

Hi i was just down at there shop and excanged the x axis motor that was causing the gecko to fault red light beside the green light on the lower right side of it.
You might want to check your...

Hi and thanks for the info found out the x axis coupling was just to big for the shaft machined it out and bushed now go and tight.

for the faulting of the drive it was the screws on the...

Hi i got at it today and i found that if the ground wire is hooked up it will fault the drive. the screws holding the wire housing on the stepper were to small and you could just pull them out as...

thanks for repling

not making any noise and it looses about 0.040 to 0.050 on a pass

dos not seam to stall out when it is loosing stepps

it will on the first start of the day run x axis...

Hi every one had my nm-200 running today and the problem has gotten worse.

my x axis is feeding to the x+ side of the table further with every cut but the counter keeps reading the same...