This is slow speed surface, so any regular #2 grease will do the job. But looks like it is a lot of matter of preference. Key is to pick your lube and stick with it. Do not mix different kinds.
Type: Posts; User: Foogl
This is slow speed surface, so any regular #2 grease will do the job. But looks like it is a lot of matter of preference. Key is to pick your lube and stick with it. Do not mix different kinds.
I have to agree with Ian and Noel.
Please, do not bother with anything electric on 6040. I even ripped off all wiring and replaced it with shielded cables from McMaster. Added limit/zero switches,...
You also need to:
1) Put jumper between FOR (forward) and DCM. This tells VFD, that you want to spin CW. You can go fancier with relays, but jumper will do.
2) Configure VFD to accept input from...
Yeah, nickel and dimed to death ....
I bought 48V adjustable PSU from ... ebay :). 24V is just waste of good controller and motors. 3 limit switches from guess where coupled with homing + soft...
1) Yes, I'm. For money I paid ($1700) it is awesome machine. I did some upgrades (shielded wires, new hoses, G540, limit switches) but you can be probably ok just with G540. And yes, do yourself a...
Nope, you don't have to have "hard" limit switches to use soft limits. But you should have at least homing switches to reference somehow your soft limits. That's what I have and it works like charm....
Can you put nipples on 6040 without modifications or one have to drill?
If you have identical drives, I would swap it with other one to see, what will happen. Same VFD will fail => bad VFD, VFD on same machine will fail => cables or motor.
Folks, did anybody successfully implemented dynamic brake with Huanyang VFD? I was not able to find any information about braking resistor spec or how to configure VFD to use it. I tried to hook up...
Sooo, my two boxes with 6040 arrived. You hooked me up Ian!
Looks like no damage on the way. Packaging was absolutely fantastic, bubble wrap, PU foam, foil ... would take me a week to pack it like...
Thanks Ian. What I'm trying to do is to get 6040 with 1.5kW spindle and complete it with my G540. Unfortunately, sets on ebay has 0.8kW spindles + el cheapo controllers and so far there was nobody...
Alekoy, may I ask you, who was the seller you bought your machine from?
I asked several of them and none is willing to sell it without controller / spindle.
Thanks!