Search:

Offline should not be looking for a controller board. Are you sure you are running the offline version?

Turns out my single box version of the 1100 has no ability to do M codes or to assert any output bit programmatically. I did find out I can install a remote start button which would then let me set...

My setup menu indicates I do have a distribution board, though all my M codes in the config are set to zero, which supposedly means the M function options were not purchased with my machine. My docs...

There are several SW's that can composite the image..
Zerene Stacker
Helicon Focus
Photoshop.
They keep the sharp parts of each image and blend together.

The difference from frame to frame is...

No, the ideal way is to be able to program the shutter in the machine code. That way you can specify any arbitrary step size, exposure time allowance and the start and end positions. I wouldn't...

No, not a photo of cutting operation. See the links in the previous reply to see examples of things a person my want to image in this manner.

Also see many samples here: ...

for macro focus stacking. See this link: Focus Stacking Tutorial From Start To Finish

Here is the edge of a starrett ruler (0.01 mil rules) taken with 35 200 microinch steps. The depth of field...

I do have the spindle switch, but no external circuitry is actually set up to switch the motor. When I turn the switch to auto the servos do not engage. Probably some signal connections are not set...

I have a 2 axis NC mill with anilam 1100 controller. I want to do some automated photo focus stacking which this seems ideal for, but somehow I need to generate a trigger signal to trip the shutter...

I think there are command syntax differences between various versions of Anilam 1100 control SW. Bobcad had about 3 different posts but none worked with my machine. One almost worked but executed...

Yes that is exactly what I was doing. The problem is it reverses all the arrows, not just the one on the inner oval path, even if I explicitly select only that path first.

Never mind. I...

Is this webinar still available to view anywhere? I'm now jumping from V24 to V30.

I'm having a similar problem. I have an "O" shaped pocket with a pocket toolpath and a profile finish toolpath. The pocket cut works fine but when it does the finish cut on the inside edge of the...

That worked with a few modifications.

There is no folder in my start/All Programs path for DOSbox. Just a single executable not in a folder.

The file: ...

My shoulders get sore (impingment) from reaching up to press the feed buttons on my Anilam 1100 when I am doing manual feed. Has anyone done a remote keypanel for the Anilam 1100 that can get the...

Just get or make a circle cutting jig and do it on a band saw. Piece of cake.

I looked all over for that feature and couldn't find it in V24. Must be something new in V25.

Tell me if I'm crazy. I have a D1-3 4 jaw chuck but my lathe is D1-4. There's plenty of meat in the chuck to locate the D1-4 pins and screws, but the cut for the new taper will break into the old...

Yes you are on the right track, it is an end mil sharper for use with surface grinders. I was able to even find a manual for an identical unit. ...

What is this and who made it?

180438

180439

180440

180441

I've converted to WIn7 64bit and trying to get my Anilam offline SW to run again. First I got the 16bit not supported error, so I loaded up the WinXP mode and that seems to work, but now when I run...

Yes, exactly. Z move to rapid plane (manual), move to new position, indicate z depth to set my z axis DRO, then continue until next z move. Or allow me to specify a z increment (i.e. .05) and...

Maybe I suck but I have just a 2 axis CNC control on my mill. I would like to see ways to use z-axis roughing (or whatever) to allow me to manually run the third axis using fairly large steps to do...

I'd also like to find the correct wiring for the RS232 cable if anyone has that.

-----------------------------------------------------------

I don't have the wiring diagram for the control but...

Someone did get me a copy of the off-line SW and I'm really glad I didn't buy it. I would be really pissed if I payed $400 for that poor piece of SW. I've been hearing the same things about Bobcad...

Hi,

I just acquired and got working an Chevalier 10x50 mill with Anilam 1100 2 axis CNC. I've stumbled through programming a couple parts on the front panel.
I'd like to find the off line SW for...