Hi All,
I'm building a setup which requires 2 stepper motors turning the same shaft in order to move a joint in a robotic arm. They are on opposite ends of the shaft so they need to turn opposite...
Type: Posts; User: henradrie
Hi All,
I'm building a setup which requires 2 stepper motors turning the same shaft in order to move a joint in a robotic arm. They are on opposite ends of the shaft so they need to turn opposite...
Thanks, it's starting to make sense now, but the diagram lists 8 input channels, 8 output channels, and 8 PWM but my configuration screen lists 16 input channels and 64 output channels.
What are...
The reason I want to use an encoder with the stepper is that I have a rig set up where I am testing a small transmission to failure. The stepper is driving the transmission back and forth and the...
Hi All,
I've got a simple machine that uses a single stepper motor controlled by a kstep. That's working fine but now I want to add an encoder to it. Problem is that I don't know where to attach...
I've got a 3 axis calibration machine with 1 translation axis and 2 rotational axes. Currently it is controlled using LabView but I'm converting it to CNC because LabView is temperamental.
This...
I used Mach 3 to control a K2 machine a few weeks ago but haven't been able to get it set up since the machine was moved. When I open a certain profile (the one for the K2) it freezes and I have to...
I'm pretty new at this and am a bit over my head.
I'm trying to get mastercam to work with wincnc but it just isn't happening. I keep getting "arc radius" errors so I think it has something to do...
Anyone know of any good mastercam X7 post processors that will work with wincnc? I downloaded the one from the website but it isn't working properly, it can't execute a G02 command.