Go into CNC ISO page, MENU SELECT - STARTUP/SETUP - SET PASSWORD (SUNRISE) - MACHINE DATA - AXIS MACHINE DATA / AXIS MD (select spindle using vertical AXIS + / AXIS - keys), search for 34090(0) and...
Type: Posts; User: Control_CNC
Go into CNC ISO page, MENU SELECT - STARTUP/SETUP - SET PASSWORD (SUNRISE) - MACHINE DATA - AXIS MACHINE DATA / AXIS MD (select spindle using vertical AXIS + / AXIS - keys), search for 34090(0) and...
What operating system is it running, windows XP? Had a look at the google drive with ghost image on, it is in multiple partitions, are you able to create a new backup without partitions? Also do you...
Is there anybody out there that can reliably repair and test Siemens 810D CCU1, CCU3 and CCU3.4 boards? I’ve tried several different companies now who claim they can but ultimately all struggle....
Hi, if you go into diagnosis —> alarms page, is it just Y axis sign of life alarm or are other axis’ at fault too? Siemens 810D is a combi unit that houses all drives on one unit so can be difficult...
A quick summary of our company, we are a UK based CNC breakdown specialists. We specialise in CNC Machines with Siemens controls and / or Siemens drives. We carry a large stock of spares and have all...
Ok, so the parameters on 828dsl (pretty certain 802 are the same) are as follows:
Setup - machine data - drive machine data - axis machine data
using vertical soft key axis + / axis - select...
So it looks like 810D with PCU20 HMI on the front end, fairly standard setup for XYZ machines. It looks like the PCU20 is either faulty or corrupt.
I have a couple of questions to help to help...
Hi Again, sorry for late response as not been on in a while. I had a look through your files and there are several backups of NC & PLC datas on there in .arc formats route path: (cnc - siemens -...
Check behind hmi panel, what is the pcu type, pcu20, pcu50, mmc102, mmc103? There should be a Siemens sticker indicating type. Hopefully you have a pcu50 with .arc backup on.
Also check profibus...
Hi, I'm Graham from the UK, I've used this forum as a reference for a while and found it very helpful. I thought I'd join so I can help and contribute too. I'm ex siemens service engineer now self...
Hi, I see this is an old post and you may have resolved your issue however just in case you are still struggling, nck battery is located on the ccu. If you open the electrical cabinet, the ccu is the...
PF = program fault
SF = system fault,
Left hand bank of leds indicate the NC, right hand leds are PLC. If the plc is in run which it looks to be as numerical display is 6 and +5 and PR (program...