Smart Cool, absolutely! YES!! I bought mine with my 770 and also at the same time bought 2 fog busters. Well, I've used the fog busters a total of twice and the smart cool on every other part! ...
Type: Posts; User: mxwrench
Smart Cool, absolutely! YES!! I bought mine with my 770 and also at the same time bought 2 fog busters. Well, I've used the fog busters a total of twice and the smart cool on every other part! ...
Guys,
I'm tired of tripping over the box full of the servo system I pulled off my el dorado bridge mill when I traded it in.
Looking to sell:
Complete servo system for 2003 Eldorado Bridgemill.
...
https://www.cnczone.com/forums/tormach-pathpilot-/342028-problem-brand-new-pcnc-770-computer-finding.html
This was my similar dealings with the MESA card and the resolution. Kinda interesting.
...
Quite right! Using your example, I am able to boot the controller into Path Pilot successfully by switching on the controller from the panel, wait for it to load to card not found error msg, then...
PCW_MESA- I made a voltage reading across the 3.3 tap to GND and measured a stable reading of 3.35vdc (this was while the 2 red LEDs were solid).
I spoke with Tormach customer support yesterday...
I never actually got a measurement! I was so A. panicked that I shorted the pins with the probe and the computer shut down, then B. surprised that the controller booted successfully without error...
Thanks PCW_MESA for the response.
Here is a little update for you and whomever might be interested:
Yesterday after posting, I dug around on the I-net and found the 5125 std instruction manual...
Like I said in the title, Brand new 770, Start up today, first time. Booted to terms of use screen, then thru to choose which model menu, then reboot.
Upon reboot, screen shows "mesa card not...
I have had my el dorado for about 4 years now and I originally bought the complete cnc package with dro. Everything came installed. I have experienced all the same issues most of you have had and...