Turned on the power this morning and the machine comes up with spindle overheat and powers down after 15 sec. I have attached a picture of the screen.
Anyone have any suggestions?
Machine is...
Type: Posts; User: Get lucky
Turned on the power this morning and the machine comes up with spindle overheat and powers down after 15 sec. I have attached a picture of the screen.
Anyone have any suggestions?
Machine is...
That was perfect other then the post I have been working form is different form yours.
Thank you so much for the help and the insight, I'm sure I will be back for more info when I start to work on...
So ......, what would happen if you jumped to a section that didn't have a G90 on it
--- always try to return things back to the default state, same reason you state the defaults at the beginning of...
First off I have put them back to the way it was as you recommend.
This post was created in 2003 by someone in our shop and has been used ever since.
We are on Master Cam X9 for Solidoworks...
Did some searching online about the defaults and change them.
What I entered is this
319690
The result was this.
319692
Not sure how to make it post the way I want.
What I would like to see is code like this
G91 G28 Z0.
G28 Y0
N500M00
(FLIP PART G56)
T1 M6
(T# COMMENT)
G0G90G56X.......Y......S.......M3
First off I am fairly new to Mastercam and have only started to modify my post over the last couple months. I almost have the post to the way I want it but one nag is left. When I add a manual entry...
that was my thought to but what a pain in the butt to have to do that to every part you want to put a knurl on.
I just started to use solidworks and being a machinest fo so many years has gotten me to be a little pickie. I would like to know how to apply a knrul to the out side a surface. If anyone could help ...
Looks to me that the B sets the last tool that you want to set........B= to macro#2 and in the program it is 20 that would proble be the last tool in carosel.
Thank you for replying I have been leaving the machine run but want to gt this fixed when I have a little down I will be sure to give you a call so I get this problem resolved.
We never have to jog to line hash marks up as before we shut it down for the night type in HO so we know that it starts up in the same spot every day.
I guess I really don't understand what the...
yeap I also tryed changing it to a 80x30x30
I got it up and running now by powering down and back up about thirty time this morning.
I was reading a quick refrance card for the machine today...
That may have to be done, I just hate to bother them they are always so busy.
None when i put it in jog and handle it to the positive it will only move 4.000 then stops it it should move to 15.000 if I power it down and back up a few time it will work but I shouldn't have too....
I have a Fadal VMC6030 with 88hs control.
When I powered up the machine this morning it will only come 4.000 to and then stop but will over travel in the negetive.
I did the Cold start, powered...
Didn't work it is still dropping the .2 and the .1 after the G84
Nick,
I do have the line in g >2.1 G
The post is adding the G84 it's just droping the .1 & .2 and i have no idea why.
Kyle (nuts)
That worked great and thank you Nick.
Now my next question
why is it droping the G84.2 and the G84.1
M6 T4
G0 G90 G54 S300 M3 X11.0214 Y1.4807
G84 "G84.2"
G43 H4 M8 Z0.1
Here is the message it gives
I don't under stand it
http://i235.photobucket.com/albums/ee161/KyleWinkelman/Junk/Ero.jpg
I'm not sure why this will not work If somebody has any insight as to why.
I'm just starting to mess with these I have my Fanuc done now it's just the Fadal.
name Fadal
% 00
/ 00
Thank you Neal worked great
I have a VMC 6030 88HS control in format 2
This problem started on Saturday that it would not pull an arc so I changed that part to square corners because it didn't mater.
But now I am...
This machine has the round motors on it.
I was told this morning that it also jumped in the X on friday but have to talk to the person that was running it at the time because the never left a note...
I have a VMC6030
I had a note from night shift this morning that they heard a loud bang in the machine and when the program finish the part patern had shifted .200 or one revoltion of the ball...
just saw this on another form thought it was sweet
YouTube- 5Axis Machining cnc [www.disn.co.jp] 5Achs DMG/HyperMILL
They had one at the last company I worked for. It was an ok mill but a pain in the butt to program kinda like the old cnc's. If you miss a line or mess something up you have to start all over from...
Welcome! MN here as well
Welcome to a Place I don't understand(nuts)
I throw one more Merry christmass to you all!