504,518 active members
4,412 visitors online
Register for free
Login

Search:

Type: Posts; User: deadlykitten

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: Variable Programming - Critique My Code, Please

    hi, if you are still intersted into this, i may try to help :) ... but i can't download the code, and i can't see the picture, so re-post them if you wish / kindly :)
  2. Re: Coolant in tool changer oil - GENOS 560 V

    hi, please share a photo with all your pullstud types; it may be an o-ring issue, that may lead to spindle - burn

    i have seen this before, and finding this issue took months; i don't know if this...
  3. Replies
    29
    Views
    528

    Re: Tips for straighter bores

    hi hanermo, yup, and also those delivered by coordinate grinding machines, especially because they grind, thus cutting force is low, and remanent tension, inside the part, is really low : this helps...
  4. Replies
    1
    Views
    29

    Re: dimensionality of geometry

    hi :)
    ... image 1 : that is a dimension based on " the principle of maximum material " ( i don't know if this translation is ok ); those 2 diameters have to be as concentric as possible; should be...
  5. Replies
    29
    Views
    528

    Re: Tips for straighter bores

    hi, i discuss methods to deliver straighter bores; this also includes reamers :)



    with all respect, this is not true ...



    when the reamer follows the hole, it is because of a few...
  6. Replies
    26
    Views
    294

    Re: National para

    hi, check also this okuma app : https://www.myokuma.com/view-control

    kindly :)
  7. Re: Need help with Mori-Seiki programs.

    hy bavsec, idea shared by dan fritz seems ok; you definetly need a text-editor, capable of handling custom conditions; i believe that also notepad++ can do such things, but i don't have experience...
  8. Re: please, how to check alignment for small tool ...

    hello, it's been a while, but i believe i know how to check a genswiss system; idea behind it that any measuring device has to be checked to be within specs, and if it is ok, then you may use it...
  9. Replies
    29
    Views
    528

    Re: Tips for straighter bores

    oau, i forgot this thread :)



    all these are frequent aspects :
    ... tool costs, especially non-standard sizes
    ... tool delivery time
    ... setup time ( alignment, tir check, etc )
    ......
  10. Poll: Re: Machinist or Machine Operator? You decide..

    oau, what a conversation :) i am so full of wisdom-ready-2-share :
    ... once an operator, maybe always an operator; once a machinist, never again an operator
    ... women are the best machinists; god...
  11. Re: HOW DO YOU METRIC THREAD WITH OKUMA LATHE OSP

    hi, you don't need to re-set the machine, to be able to deliver a metric or inch thread; you need a bit of infos about :
    ... threading cycles ( pls find attached pdf )
    ... metric threads profile...
  12. Re: Need to flatten 5/8" thick aluminum plate

    27" x 48", 090" > 70 x 125, curved2.3 pfff :)

    with a bit of luck, you may accentuate the curvature each time you cut it, because there is remanent tension inside the plate; you have to 'calm' it...
  13. Re: Machine does not cycle start in any screen other than the main program screen

    hi, i also learned this trick here, on the forum, from mr wizard : bit 6.0 = 1 , cycle start enabled in other than operation mode / kindly :)
  14. Replies
    10
    Views
    42

    Re: 428 Alarm-B

    hi beefheart, here it seems ok, rapids are not toward the chuck; pls check attached image; tool is r0.8P3



    your lathe does not have igf ?

    there are free cams, also those for which you have...
  15. Re: G85 LAP CYCLE - Doesnt like my U value

    yup, it's a flow of paralel lines, intersecting a toolpath made of segments & arches + some offset function, so to handle U W <> 0

    mmm, just saying :)
  16. Replies
    9
    Views
    59

    Re: OKUMA TAPPING WITH G84 AND G284

    ok ... if you tap a lot, check attached : internal coolant, rapid shank, vhm head

    forming, not cutting; here : https://www.lmt-tools.com/en/

    kindly :)
  17. Replies
    10
    Views
    42

    Re: 428 Alarm-B

    hi, if you intend to eliminate the face-cut operation, then, instead of roughing towards z-( rough od g85 g81 ), try roughing towards x- ( rough od face g85 g82 ); otherwise, if you keep the rough...
  18. Replies
    10
    Views
    42

    Re: 428 Alarm-B

    hi, pls share tools nose radius; at first glance, without testing, i can say this :
    ... N60 G01 : requies to have a feed value specified ( eq F0.12 G95 )
    ... if you use U1, then try also U1 W0.5,...
  19. Replies
    2
    Views
    38

    Re: User Graphic Command

    i mean a parametric, like this :




    [ test.min ]


    NOEX LEN1 = 60
  20. Replies
    2
    Views
    38

    Re: User Graphic Command

    hi, i also tried, and it failed ... but, what about creating a macro, so to handle this ?

    code will be like this :




    [ main-program.min ]

    CALL ODRAW
  21. Re: G85 LAP CYCLE - Doesnt like my U value

    hei kurmay, what is fcc ? however, even if you can not see the logic, you may observe the output coordinates; futher more, based on those coordinates, you may figure what the logic is, and be able to...
  22. Re: G85 LAP CYCLE - Doesnt like my U value

    hi teahole, i am not talking about that, but about this :


    NAT01 G81
    G0 X61 Z61 G42
    G1 X61 Z60 F0.1
    G3 X63 Z59 K-1
    G1 X63 Z-4.5
    G40
    G80
  23. Replies
    3
    Views
    30

    Re: System variables for Fanuc Control

    hi nodo, if the operator forgots, then protect the machine, by using load monitor, and, when it stops, execute a mid-cycle restart / kindly :)
  24. Replies
    24
    Views
    9,418

    Re: System variables

    hello citizens, previous post shows how to tune a classical code, so to reduce it's execution time from 160-190ms, to 67-80ms

    now, i wish to share you another trick, to reduce the execution time...
  25. Re: please, a few questions about using *.sdf

    just one more thing : i know that using sdf is common, okuma's die hard, and old machines with low memory are still there

    for your reference : if you try to minimize the execution time of your...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4