504,518 active members
4,206 visitors online
Register for free
Login

Search:

Type: Posts; User: ryanjg117

Search: Search took 0.01 seconds.

  1. Replies
    17
    Views
    17

    Re: Building or buying?

    That's a great deal. Where/how did you find it?
  2. Recommended DIY baseline design for two-spindle wood and plasma cutting CNC

    I'd like to build my first CNC with the following features/capabilities:

    * Able to cut a full sheet of 4x8' plywood
    * Two spindles, one for wood and one for plasma cutter
    * Removeable water tray...
  3. Replies
    17
    Views
    17

    Building or buying?

    Interested in potentially making my own CNC router for woodworking, with a capacity around a full sheet of 4x8' plywood. I currently use a friend's dual-spindle custom-made CNC with vacuum hold down...
  4. Cutting 100s of small plywood parts on CNC router with vacuum table

    Hello, I've got a semi-production project coming up that calls for cutting hundreds of small plywood components, many of them just inches in size, out of 9mm thick baltic birch plywood. The CNC...
  5. Re: Best bit for cutting 200+ holes in thick Baltic birch plywood?

    I'm going to try the drill bit followed by .25" end mill for the finishing pass. For the first pass, it's not necessary that it be a flat bottom, since that will be addressed on the follow-up pass.
    ...
  6. Re: Best bit for cutting 200+ holes in thick Baltic birch plywood?

    Sounds like a plan - except for the 1/4" holes, a flat bottom is necessary. The drill bits would leave a funnel-shaped bottom, correct? Is there such a thing as a flat-bottomed drill bit?
  7. Re: Best bit for cutting 200+ holes in thick Baltic birch plywood?

    Thanks for the advice. For the 1/4" holes on the first pass, I suppose I could use a spiral upcut with 1/4" cutting diameter, right? Since surface tearout isn't really an issue as the 3/8" bit will...
  8. Best bit for cutting 200+ holes in thick Baltic birch plywood?

    I have a new project that calls for more than 200+ holes cut into 25mm thick baltic birch plywood, for each platform. My overall project calls for more than 100 of these decks, so lots of hole...
Results 1 to 8 of 9