Search:

you know the material is tough, so the #123 must be geometric decreasing, programing like G76 function, or an alternating thread (zigzag),that is better.

I read the pregram, found the #127 value is longer, the guide bush can not support, so change te #127 value, test cut again.

hi everyone

attached file you can find the screenshots that turning eccentric on citizen l20.


hong

hello everyone
i mill the flat on l20, because the material is 5.0mm,so the flat have vibration.
i want to make guide bush longer 10.0mm, but i do not find the proper toolhold that insert center...

hello everyone
M20 tool life management can use 80 tools,but the tool no. is consistent tooling no. if this do not need 80 tools.
when the turret one position install 2 toolings, the tool...

hi cogsman1
I finished test cutting, the attached file you can find drawing, every side arc is not correct, use G41 also same, could you give me some advise, thank you




(I don't know why i...

thank you for your support,
I learn much from you

hello

i want to cut bone screw on citizen machine L20,the head of bone screw is not hexagon it like plum blossom,min radius is 0.6mm, i need to use high frenquency spindle to cut it on back...

you can test this way,turning a 12.0mm length first, threadwhirling again, than deburr untill finish all length.

hi bkcom
thank you support

regards

hong

hello fanucman
thank you
i cannot find i/o softkey in fanuc32i.

best regards

hong

dear all
howto download pmc ladder from mitsubishi meldas m500/m600/m700 series.not parameter.
thank all

dear all
how to download pmc ladder from fanuc 0i/18i/31i.not parameter.
thank all

hello
this is kind of machine that no c axis function.

hi
you can read in tb-deco software's help menu, the code is m198.

regards

sorry,my english is poor.

the machine stoped, no battery, lost parameter.

i got cnc and pmc parameter only, but i don't know how to put parameter into machine by hand.

another question, For...

the machine system is fanuc 16tb

hello everyone

our company bought old machine. the machine had not been run for long time, no battery, lost all parameter, i got cnc parameter and pmc parameter only, but i don't know how to put...

dear Martin

thank your support

i am worry that the part have vibration if cutting threading,because the threading is square. the material is titanium.

did you cut this kind of thread before?...

dear cogsman1

i don't know how to use the code G851/G850.
i learn from manual book, but i didn't understand the meaning, no example.
could you give me detail explain. thank you

...

hello viore126

thank you to replay very quickly

this system is 18i and 31i

thank you

regards

dear Martin
Thanks you to reply very quickly
our plan use deco13a,
you mean this threading can be cut if use g933 code.


thank you

regards

hello
could anyone tell me how to save the ladder software than delete and update the ladder.thank you

hello Martin

attached file you can find drawing, i don't know how to cut Rectargle threading, pitch; (1.0mm material;titanium)
i worry the tool broken when finishing the threading, could you...

hello everyone
attached the file you can find thread, the angle of one side is minus(-3.0 degree), so it is better to program parameter programing using former tool in stead of G92, can anyone...

hello
thank you very much

hello everyone
can anyone explain the G114.2 and G114.3 function to me, thank you.

hello everyone
need help. i don't know how to use Mitsubishi system G code G114.2 and G114.3 funcation, can anyone help me to explain it. thank you.

hello
this is old type machine, you need ask tornos company

Hi Scott
need your help,I can not go to the website www.ncplot.com

thank you.