Thanks
Yeah someone here came up with this idea of progressive spindle call but... I don't know... I don't like much that idea... If we don't have choice, maybe a subprogram call to do that but we...
Type: Posts; User: Wiseco
Thanks
Yeah someone here came up with this idea of progressive spindle call but... I don't know... I don't like much that idea... If we don't have choice, maybe a subprogram call to do that but we...
Hi,
I would like to know if someone knows how to adjust the accel and the decel of the spindle for an Okuma lathe with a OSP-E100L. We have a LB45II-M with 2x 24" chucks on each end of the main...
Hi,
Yesterday I saw a video on youtube from a tool supplier (to not name it, tung aloy) showing a high feed turning tool. And it made me think of, is it really worth it? Like, in milling, sure it...
I don't think so. Maybe the BIOS have been changed. If you hold the reset button for 5 sec, it should reboot.
Does your feed potentiometer is set to more than 0%??? If you cannot jog axis with + and - button but you can with the wheel, it seems that the feed potentiometer is set to 0%. Just a quick tought...
Can you put the drives ON? Are you able to do a homing?
In Network Place, add a network link to your machine (static DHCP adress). It work for me.
First, if you're behind a router, config it to have a static DHCP for your machine. Then, go to the network setup page on your machine and type in the DHCP address you've typed for your router. For...
For your network question :
Last couple month, the single board cpu have gave is last breath. So instead of searching for the same SBC, I've checked which would be compatible with the backplane...
I tryed to delete this topic but...:confused:
So the problem is solved. I didn't know how but after removing the servo from the machine, open it, made a carefull inspection without finding...
Hi,
To make a long story short, I due to make a servicing on the z axis servo of my torq-cut 22. As I saw the bad shape of that axis, I decide to swap it with the X axis servo, which I also make a...
In the turn/face feature, you should have the feed mode. I'm not at work to guide you but with this mode, you should be able to do what you want.
Here :
Sending Multiple Programs Under One File Name - In the Advanced Editor, you can send multiple
program files via the RS232 port or a floppy disk, using the SEND RS232 or SEND FLOPPY commands under...
Now that is weird... I've take a quick look to settings and I see nothing that can doubled X data.
talk to your foreman!
On my side, when I turned Nylatron (I know it's not the same density of the HDPE but...) I use a round HSS drill rod which I shaped a very sharp tool that I mount on a tool holder. I stoned the tool...
Why not changing tools elsewhere of the origin?
Just pay attention bro... machines are not built to be set on hold, they are built to run and make chips!
Hi guyz,
You will like my comment ;
In manual mode, operator dro mode, enter the value of the axis like this;
in example, I wanna set my X to 1.000 : enter X1. then press origin.
Simple...
Next time you're threading, use A60 in your G76 line. The tool will cut on one side of the tool nose. You can go faster (SFM) and chips will exit on one side.
.
Don't forget to turn the option off after using it to not loose your 198hr. And you must reboot the machine after that.
If you do some test on the machine, don't forget to write a note so other operator will know that offsets can be wrong as what Geof said don't take a work offset in consideration.
In a basic ways,...
WOW! Jason Voorhees goes CNC now!!! Amazing!
no param to set, just push 0 and fwd or rev and the spindle will be "lock"
I have an open TL-2 and as I never or barely use collant, I'm very satisfied with what I have as I don't do mass production runs.
Check on the SPE (Society of plastics engineers) website. They have alot of books!
http://www.4spe.org/
http://www.4spe.org/training/products/1015.php
On our TL-2 we have removed hinge pins before putting the machine in place to be able to save some space. With this manner, when we must do something in the enclosure (which it happened 1 or 2 times...
Recheck your calculation, maybe youre injection speed is too fast so you have a peak of injection pressure. Show us the specs of your parts with measurement and I will came back to you with my...
If it's not for mass production, don't bother with depth of cut speed and stuff, just do it gently. Put something like 0.010 of DOC and for the speed go with 200rpm. As for the feed, it's the pitch...