Hello
I cannot quite imagine how the part looks like.
If you are able to post a sketch then I can have a look at it.
It always depends on the 3D for Offset finishing I would use max. 30...
Type: Posts; User: narator
Hello
I cannot quite imagine how the part looks like.
If you are able to post a sketch then I can have a look at it.
It always depends on the 3D for Offset finishing I would use max. 30...
Hello
What version have you got?
I had the same problem but it got solved through an online update!
I would solve your 3D problem by creating a tool list only for 3D- hence creating a new...
Machine is on the computer without a router!
I think here you will find what you're looking for:
http://grabcad.com/library
Kind regards
Hello
It has less to do with the CAM software.
It has more to do with the machine controller ... what controller do you have?
Yes thank you. There is a lot of stuff there but I would need a special solution, I probably have to contact Heidenhain...
Thought that there might be a PC tool but on the Heidenhain homepage there...
Hello
Has anybody created your own clamping devices in Collision Monitoring yet?
Is there a PC software for that?
Kind regards
Hello
what you mean “doesn’t work anymore”? Has it ever worked on a part before?
Because there is not normally a lot to set up! Your part might be the problem!
What do you want to do... draw...
Hello
Does anybody know how I can activate the tool pre-selection "Tool Def" for a post processor profile on 2.5D milling?
And how can I create a independent tool data bank separately on the post...
Hello
As far as I know only the Version 7.0.20 is enabled for Windows 7.
Kind regards
The feed is a minor matter when tapping!
M8 has a inclination of 1,25mm and you have 1100Rev/min x 1,25 -----> 1375mm/Minute
Whereas your machine will manage the whole thing with the particular...
Hello Yardman
Thanks for your help!
Works perfect!
Best wishes Narator
Hello
Does anybody know where you can set the positioning feed of the rotation axis with 2,5D milling? ( Tcn 530)
F999999 are a bit too much for me, I rather change it directly on the machine, but...
Hello
Is the emergency switch in its initial position?
Then, do you press the switch button first and immediately after that the CE-button?
You have seen the machine in action, haven’t you?
...
Hello
Maybe you should try to export as parasolid .x_t after importing. And then import the parasolid once again.
Greetings
Hello
Yeah, it works via the vertical bar!
As I tried that, the machine hadn’t been restarted. Maybe that was the reason.
Or maybe it’s an option that costs extra.
Regards
Hello –michael-
Thanks for the advice. Exactly this stands in all other machines (where the panel works)!
But it doesn’t help in case of our DMU 50.
Probably the control element isn’t connected....
Hello
Last week I worked at the machine of my colleague. This control panel didn’t work (wasn’t activated)
And I need on/off keys for cooling liquid!
[attachment=6453:bedienfeld.JPG]
Machine is...
We’ve got one by Schunk
BIG New Baby Chuck
[attachment=5698:Baby_Chuck.jpg]
Well, it has never cost anything for us. Maybe is it temporary or is an additional option?
Yardman as I understand, you’re from Camtek.
So please clear it up ;)
P.S.: I’m currently testing the...
Hi
Just call Camtek up and say you need adjustment for tnc530
It’s free ;)
Greetings
I have only demo at home, too.
But there’s no tooling sheet there!
In the factory you can choose between html/pdf outputs. We have pdf.
Greetings
Hello
What version do you have? We’ve got 5.3.14.
What do you mean with automation? Do you want it to be saved anywhere?
As far I know all data may be in there.
[attachment=4870:Einrichteb.jpg]
Hello
It has to work, I do it every day^^
It’s inside of the register editing
[attachment=4244:bohr.jpg]
And you can create drilling groups
[attachment=4245:gruppe.jpg]
We have a DMU 60 with turnbuckle A-axis and Mill Plus controller
One can place a geometry on a lateral surface in peps. My question is about the simulation of the whole thing!
When one works with...
I think nc font is genius, you can engrave not only single line fonts, but also windows fonts, for example all free fonts (search in google).
Here’s an example