Search:

I need a person that can teach me how to make rotary toolpaths for my CNC. I had a look at everything on the internet about it but I still have issues as the final toolpath is either incomplete going...

i need to cut HPL sheet (thickness 10 mm ), Suggest me what type of tool i need to buy, if needed to cut on CNC Router
, i want 6 mm end mill bit.
please provide me the online supplier for the...

REQUIRED DXF FILE FOR CUTTING EIFFEL TOWER

Any body having cutting file for laser - Eiffel tower , please send me the file.
i would be thankful from my bottom heart.

Thankyou

multicam plt mm.
artcam modelling using mm
postprocessor in mm
yes tool dia and everything is fine

How can i give multiple depth in artcam

I have a multicam laser.
the issue is that , recently i changed the pc and laser is not firing even though the file transfer and motion is happening.
any advice would be highly appreciated.

Hi all,
can we send plt files generated from enroute can be used to run files on maxicam (Not multicam)
if any body knows about it plz share your knowledge.

thanks

we have a small issue with router.
we have been machining file on router using enroute software.
recently we have a 3d wood carving job , and would like to send the 3d files directly from...

hi everyone,

we had to make a acrylic bended handle of 15 mm acrylic clear
the shape is semi circle -
dia meter outer 95 mm
dia meter innter - 65 mm
we have a cr clarke line bendiing machine...

hi group,

anyone expeienced in builting vaccum foarming machines.
i would like to build it my own. any suggestion would be helpful.

check it out

i increased the frequency, upto an extent better result for high thickness

Yes, i get lines effect in the sides of acrylic from top to bottom, i have attached a image
I you have experience running kern, i have lot of quetion to put forward

i get line effect even when i...

Any body working in kern laser machine, i have Certain doubts to be clarified
Plz give me the parameters for cutting 15 mm thick clear acrylic, when i cut i get lined effect on the sides of the...

can some one suggest the tool for hpl material.
Hpl have variety of application, but which work is good if i have cnc routers

I accept with what loutenzia explained four flute have smaller chip space so it is better to use 3 mm 2 flute tool(Ham tool) to cut mdf , when working with plastics single flute is better with both...

When i work with laser machine , i find difficulties
how can i cut veneer paper for complicated designs, when it starts cutting the veneer seems to bending,even if i cut how can i remove all the...

Hi,i am new in signage works,so can anyone explain the way to paint the engraved portion (hatched sign/letters) on brass.I also want the type of paint to be used since its is a outdoor signage

Hi,i am new in signage works,so can anyone explain the way to paint the engraved portion (hatched sign/letters) on brass.I also want the type of paint to be used since its is a outdoor signage

Hi

We have cnc routers,but we are in kuwait

1. Codema (Bilateral Monobending heating machine fro plastic)

If someone holds or works on these machines and aiding machines ,plz forward your knowledge regarding the merits& demerits.
I am in...

Hi all. I am indeed of some information regarding the machine which I would like to install it to my new factory; mainly I would like to know the power supply and compressed air requirements for the...

Hi all. I am indeed of some information regarding the machine which I would like to install it to my new factory; mainly I would like to know the power supply and compressed air requirements for the...

Hi all. I am indeed of some information regarding the machine which I would like to install it to my new factory; mainly I would like to know the power supply and compressed air requirements for the...

thks 4 help, i will try what u advised ... hope we get more ideas when we combine n try.

First of all many many thnks for the supportive answer u have given me.i would like to get much more information in this field.
if u r a proffesional marquetry guy please provide me certain tips...

any idea abt marquetry works, any idea apprecietable.
i hav laser cutter i would like to cut veneer using this but i dont have idea or the proper procedure to remove the cut veneer after laser...

i am new in this marquetry work. i hav a laser cutting machine, which i would use 4 cutting veneer but i have too much issues while cutting veneer paper using laser, so any body involved in such type...

i tried what you suggested by fine tuning the pressure switch , i got my machine working well as it was, thanks a lot....:)